Underwatermassageappliance model Boppard, type UW 1800 AC - 2 Pages

Add to MyMedicalExpo favorites
Underwatermassageappliance model Boppard, type UW 1800 AC

Catalog excerpts

Underwatermassage- and Combinationappliances Underwatermassageappliance model Boppard, type UW 1800 AC part-no. AU1120 for the application of underwater jet massages, consisting of: Acrylic glass tub body, seamlessly deformed, glass-fibre reinforced, on 4 adjustable feet with rubber protecting cap. Polystyrene cladding, colour white. Choice of tub colour according to colour chart. Capacity 600 l. Dimensions: interior approx. 1800 x 800 x 600 mm, exterior approx. 2000 x 940 x 900 mm. Tub fittings: 2 handles 1200 mm long, 1 tub filling device with noiseless inlet 1¼”, 1 plastic suction shell with sieve, 1 drainage and overflow connection 2 ½". 1 plastic pump attached to the tub, capacity 200 l/min, 3 phase current 230/400 V, 1,6 kW, IP 44, with 1 motor protection switch, dry run protection for the pump, 1 iso transformer 230/24 V TÜV, 1 ON/OFF switch, isolated built-in cocks for pressure control, hot and cold water filling, fittings made of red brass, 1 hand shower with holder, 1 tub inlet 1" made of plastic, 1 precisionmanometer, 2 connecting high-pressure hoses 1", installation according to DIN EN 1717:2011-8, 1 massage hose, 1 set of plastic spray heads 40/60/80/100/120/140 mm². Tub hygienic according to DIN VDE 0750 (IEC 601-1) and MPBetreibV with Adisan (ZR0200) cleaning agent and Bayromed ( ZR0100) active oxygen and Chlorine granules (ZR0302). CE - Sign Following parts are production line included: Part-no. SU0070 Filling unit with tub inlet 1¼“ and filling valves for warm- and coldwater each 1“. Part-no. SU0090 Four Stepp tub shortener intergrated in tub body. Optinal extras: see overview sheet 14.01.01 and 14.01.02 Special fittings and accessories Technical details subject to change Trautwein GmbH, 79312 Emmendingen Tel.: 07641/4677-30 Fax: 07641/4677-70 Internet: http://www.trautwein-gmbh.com

 Open the catalog to page 1

Underwatermassageappliance model Boppard, type UW 1800 AC part-no. AU1120 On-site connections 1. cold water sleeve 1", flush with floor 2. warm water sleeve 1", flush with floor 3. elektr.-floor connection, 1,5m long, 3 phase current, 400 V/3/N/SL 1,5 mm², motor 1,6 kW, 4,2 A 4. Drainage with odour trap ∅ 100 40 mm sunk, capacity 3,5 l/sec. In case of flush or raised installation, the flow-off capacity must be throttled down to 2 l/sec. On site safety measures: Stop cock cold and warm water. All-pole circuit breaker within the room. Protection switch, nominal fault current max. 30 mA,...

 Open the catalog to page 2

All Trautwein catalogs and technical brochures

  1. Thermo-Spa

    2 Pages