Cassette Seal CSL 1500 CASSETTE SEALING SOLUTION FOR HEAVY-DUTY APPLICATIONS

If Your Duty is Heavy-Duty Trelleborg Sealing Solutions, a leader in cassette sealing technology, has revolutionized cassette seal design with their new CSL 1500. The new cassette seal CSL 1500 turns conventional thinking on cassette seal design insideout by incorporating opposing sprung lips as well as a number of other innovations. This allows CSL 1500 to run cooler and longer, allowing it to seal better. The unitized seal design improves contaminant exclusion and static sealing ability, while its advanced lip technology helps reduce friction and wear to lengthen seal life, all in a single...

Additional Cassette Seals for Heavy-duty Applications from Trelleborg: A Cassette Seal is a fully enclosed seal that is able to perform as an all-in-one oil seal, wear sleeve and dust protector. In addition to the new Cassette Seal 1500, the following cassette seals are suitable for heavy-duty applications. Depending on the material, Cassette Seals can operate in temperatures from -40 °C to +150 °C/ -40 °F to +302 °F. Ask your local Trelleborg Sealing Solutions marketing company for further information. Cassette Seal System 500 The Trelleborg Sealing Solutions System 500 seal was developed primarily...

Successfully performing for a total of 1,500 hours in slurry testing, over 3,000 hours in hot oil tests and over one year in grueling field conditions without leakage, the CSL 1500 impressively demonstrates the results of a cutting edge technology based on 40 years of experience. SLURRY TEST Test conditions were as follows: Test conditions were as follows: Housing size: 230 mm / 9.055 inch Slurry: 10 % clay, 7 % fine sand, remainder water misalignment: minimal with OD of 190 mm 27 rpm and 140 rpm with OD of 7.480 inch Direction: Clockwise & Anti-clockwise Duration: in total 1,500 hours Measured:...

Cutting Edge Technology Stacked design The stacked design allows more room to add components and permits a much larger volume of grease between the lips, which serves as a barrier to contamination. The metal/rubber outer diameter gives a positive static seal, but still allows dissipation of heat from the contaminant lip. Metal cases The metal cases have been designed in such a way that no crimping is needed to keep them together, allowing for costeffective manufacturing. Metal can The step in the outside of the metal adds stability to prevent deformation during assembly. Oil-facing side The oil-facing...

Austria – Vienna Americas Regional Brazil – São José dos Campos Canada – Etobicoke, ON Canada East – Montreal, QC Canada West – Langley, BC Mexico – Mexico City USA, Great Lakes – Fort Wayne, IN USA, Midsouth – Mt. Juliet, TN USA, Midwest – Hanover Park, IL USA, Northern California – Fresno, CA USA, Northwest – Portland, OR USA, Southwest – Houston, TX Asia Pacific Asia Pacific Regional China – Hong Kong China – Shanghai India – Bangalore Japan – Tokyo Korea – Seoul Malaysia – Kuala Lumpur Taiwan – Taichung Thailand – Bangkok Singapore and all other countries in Asia Middle East Regional Belgium...