TIGER LARGE CANNULATED SCREW SYSTEM The Tiger Large Cannulated Screw is a self-drilling, self-tapping, titanium alloy lag screw with the look, strength, and bite of a “Tiger”. CANNULATED SCREW FIXATION • 5.5 and 7.0mm diameter Type II anodized screws available in both long and short thread lengths • Tiger stripe flute intended to channel out bone particulate, increase implant-to-bone surface area for better osteointegration capabilities, and disperse insertion stress • Hexalobe head with tapered proximal shaft intended to add torsional strength at time ofgreatest need • Modular sleeve assembly and parallel wire guide available for assistance with implant

TIGER LARGE CANNULATED SCREW SYSTEM SURGICAL TECHNIQUE STEP 1: If distraction of osteotomy or fracture site occurs or is likely, a bone clamp may be used to help mitigate displacement. STEP 2: If use of the sleeve assembly is desired, assemble using a fixed handle and insert the appropriate size sleeves per desired implant diameter used in the following order: screw sleeve, drill sleeve, guide wire sleeve, and trocar. STEP 3: Apply sleeve assembly to surgical site. If necessary, use trocar to clear excess tissue. Remove trocar sleeve from the sleeve assembly STEP 4: Using the guide wire sleeve,...