TRIPP LITESERIES Important Note Please see below under Resources > Product Literature for the Power Cord Selector Worksheet for both input and output power cord selection. • Protects sensitive equipment from EMI/RFI line noise and surges • Cumulative leakage current less than 50 pA • Automatically shuts down all outlets in case of overload • Offers complete isolation from input AC mains power • Ideal for use in any industrial, network or medical environment Package Includes • IS600HGDV Isolator Series Dual-Voltage 115/230V 600W 60601-1 Medical-Grade Isolation Transformer • (2) Fuse sets (115V and 230V operation) • Input/output cable selector data sheet • Owner's manual Transformer with full CAN/ES/IEC/EN 60601-1 listing offers line isolation, step-up and step-down capabilities, and continuous noise filtering in protecting medical electronic equipment used in patient-care vicinities. Description The IS600HGDV Isolator® Series Dual-Voltage 115/230V 600W 50/60Hz Medical-Grade™ Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities. It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation. Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment. An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line. Faraday shield reduces the cumulative leakage current of the IS600HGDV and connected equipment to levels less than 50 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility-related surge conditions. Transformer filtering provides continuous common-mode noise rejection with no wearable parts. The IS600HGDV reduces 6000V IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode. Components connect to six C13 outlets with fuse overload protection and a lighted on/off switch. The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment. Requires a C13 AC input cord with country specific plug (sold separately). Features Full CAN/ES/IEC/EN 60601-1 Medical-Grade Listing with C14 Inlet and 6 C13 OutletsIdeal for protecting sensitive electronic equipment in patient-care vicinitiesReduces cumulative leakage current of Isolator and connected equipment to levels less than 50 pAInexpensive alternative to dedicated circuits and site electrical upgradesRugged all-metal housing designed to withstand frequent use in busy environmentsRequires a C13 AC input cord with country specific plug (sold separately).

TRIPP LITESERIES Selectable 115/230V Input/Output Voltage Suitable for Most ApplicationsStep-up, step-down or passthrough voltage operation (input frequency always equals output frequency)Internal low-impedance toroidal isolation transformer with Faraday shield offers 100% isolation from mains AC power lineAutomatically shuts down all outlets in case of overloadShips ready for placement in any industrial, medical, office, network or audio/video environment Protects Connected Equipment from Dangerous Spikes, Surges and Line NoiseLine isolation, continuous noise filtering and 240 joules of AC surge...

TRIPP LITESERIES SURGE / NOISE SUPPRESSION

1000 Eaton Boulevard Cleveland, OH 44122 United States https://tripplite.eaton.com TRIPP LITESERIES © 2026 Eaton. All Rights Reserved. Eaton is a registered trademark. All other trademarks are the property of their respective owners.