TRUE PHANTOM SOLUTIONS Assembly InstructionsAdult Full Body for X-Ray CT, MRI [FB-A01] VERSION 2.4 ■ 1 May 2026 [email protected] ■ www.truephantom.com

TRUE PHANTOM SOLUTIONS INC.

TRUE PHANTOM SOLUTIONS INC. Description Adult Full Body Phantom is an X-Ray/CT and MRI-compatible training product. The primary application of this phantom is to train and demonstrate various patient positioning techniques in radiology. Other uses include hands-on experience with diagnostic imaging techniques and visual evaluation to find optimal scanning conditions. In terms of MRI applications, the phantom tissues have realistic T2 relaxation time values, which makes this product the best fit for any T2-weighted MRI imaging methods. Very good results can also be achieved with proton-density...

TRUE PHANTOM SOLUTIONS INC. FB-A01 | Assembly Instructions 1. Adult Head for X-Ray CT, MRI - 1 Unit ■ Gray and White Matter ■ Frontal Sinus with Air Gaps 2. Adult Torso for X-Ray CT, MRI - 1 Unit ■ Large and Small Intestines

TRUE PHANTOM SOLUTIONS INC. 3. Adult Arms for X-Ray CT, MRI – 2 Units  Arm (Humerus)  Elbow Joints  Forearm (Radius, Ulna)  Wrist with Fingers 4. Adult Legs for X-Ray CT, MRI – 2 Units  Thigh (Femur)  Knee Joints  Leg (Tibia, Fibula)  Foot with Toes Figure 1 – Knee Assembly Kit Figure 2 – Shoulder Assembly Kit Figure 3 - Neck Assembly Kit Figure 4 - Hip Assembly Kit (note that the plastic connectors attached to the phantom are slightly bigger than the one showed on the photo and have five h

TRUE PHANTOM SOLUTIONS INC. Assembly Kit The individual parts of the full body phantom should be connected using the attached with the phantom assembly kit and plastic screws. Please do NOT overtighten the screws when you assemble the phantom. Step 1 Connect the left and right shoulders using the assembly kit as it is shown on the following image (note that the image shows only the right shoulder; the left one is done in the same way as the right one): Step 2 Connect the upper and lower legs using the knee joints:

TRUE PHANTOM SOLUTIONS INC. FB-A01 | Assembly Instructions TRUE PHANTOM SOLUTIONS INC. FB-A01 | Assembly Instructions Step 3 Connect the legs with the pelvis sing the hip joints:

TRUE PHANTOM SOLUTIONS INC. The entirely assembled phantom should look as follow:

TRUE PHANTOM SOLUTIONS INC. FB-A01 | Assembly Instructions The phantom is fabricated based on the anatomy of an actual human body, and it can be scanned in supine, prone, and Fowler positions; more importantly, scanning can be performed from multiple directions. ■ For ultrasound applications, this phantom can be scanned either with or without the ultrasonic gel. ■ For X-Ray CT applications, the artificial heart can be filled with any common contrast agents. ■ The phantom is made of urethane-based material, and it should be protected from direct exposure to any strong UV light. ■ The experiments...