TRUE PHANTOM SOLUTIONS User ManualAdult Brain (Standard) for X-Ray CT, US, MRI [BN-A01] VERSION 2.6 ■ 01 May 2026 [email protected] ■ www.truephantom.com

TRUE PHANTOM SOLUTIONS INC.

TRUE PHANTOM SOLUTIONS INC. Description The Adult Brain (Standard) phantom is designed based on an average brain, and it is made out of realistic tissue-mimicking materials suitable for Ultrasound, MRI, and X-Ray/CT applications. In terms of MRI applications, the phantom tissues have realistic T2 relaxation time values, which makes this product the best fit for any T2-weighted MRI imaging methods. Very good results can also be achieved with Proton Density imaging methods. The phantom can still be imaged with T1-weighted methods, but the T1 values are less realistic, and they are within the range...

TRUE PHANTOM SOLUTIONS INC. Front View Lateral View Perspective View

TRUE PHANTOM SOLUTIONS INC. BN-A01 | User Manual Step-by-Step Instructions A. Begin filling slowly. - Using a syringe or a very low water flow, gently pour water into the ventricle opening (large port on the back of the brain) until it reaches the top. B. Seal and reposition the brain. - Once the ventricle appears full, insert the plug into the opening. Carefully flip the brain upside down, then tilt it left and right several times. This motion helps trapped air rise toward the opening. C. Unplug and check the water level. - Remove the plug. You will notice that the water level has dropped; this...

TRUE PHANTOM SOLUTIONS INC. BN-A01 | User Manual The phantom is fabricated based on the anatomy of a real human head, and it can be scanned in supine, prone, and Fowler's positions. More importantly, scanning can be performed from multiple directions (as highlighted in the image below). • For ultrasound applications, this phantom can be scanned either by using ultrasonic gel or simply in a water tank. • For MRI applications, the artificial blood vessels can be filled with any common MRI contrast agents. Filling the phantom with blood-mimicking fluid • The phantom can be filled with most types...

TRUE PHANTOM SOLUTIONS INC. BN-A01 | User Manual TRUE PHANTOM SOLUTIONS INC. BN-A01 | User Manual Sound Velocity Density Hardness T2 S Attenuation Measured [g/cm3] [Shore 00] [ms] peC es at 2.25 MHz [dB/cm] Brain Grey Matter 1.0 ± 0.2 Brain White Matter Falx Cerebri 1.2 ± 0.2 HU Values of the Tissue-Mimicking Materials S.No. Tissue Type HU Value (Average) Brain Tissue Soft tissue and organs: Composition of urethane-based soft resin Phantom Size: 5x6x5 Inches, Weight: 2 Lbs (approx.). Shipment Size: 12 x 10 x 10 Inches, Weight: 6 Lbs (approx.)

TRUE PHANTOM SOLUTIONS INC. BN-A01 | User Manual Adult Brain (Standard) Phantom User Manual/Assembly Instructions 2-Year Warranty & Unlimited Customer Service Hard Carry Case • The phantom is made of urethane-based material and should be protected from direct exposure to any intense UV light. • The experiments conducted on the phantom can be performed in a sunny lab, but leaving the phantom under direct sunlight for weeks or months is not recommended. If the phantom is not in use, we strongly recommend storing it in a dry and dark place or covering it with a plastic sheet/foil.

TRUE PHANTOM SOLUTIONS INC. BN-A01 | User Manual • The phantom is water-resistant and can be cleaned after use. It is ideal for cleaning it either with water or with soapy water. It is also quite resistant to chemicals, but if stronger solvents are meant to be used with the phantom, we recommend doing a small test on the bottom part of the neck or legs. The phantom should be placed on its belly, and the chosen solvent can be applied on a small, selected surface of the phantom for a few hours. If there is no visible effect on the phantom's surface, it is safe to assume that the phantom is resistant...