User Manual For Head Phantom
6Pages

{{requestButtons}}

Catalog excerpts

User Manual For Head Phantom - 1

TRUE PHANTOM SOLUTIONS USER MANUAL Developed by True Phantom Solutions Inc. STIPULATION The following content is compiled by True Phantom Solutions Inc. It contains the description of the product, specifications, images and special instructions to be followed while handling the product. It is advised that this document holds copyrights between two parties and hence, should not be distributed or published without mutual consent. Adrian Wydra Date: 15/Feb/2019

Open the catalog to page 1
User Manual For Head Phantom - 2

3. 3 Dimensional views / Image(s) of the phantom 4. Special set of instructions I. Synopsis of the product: Anatomically correct phantom [Full Head] The design of this phantom is based on an average human male head and it is made out of several realistic tissue mimicking materials that are suitable for both Ultrasound and MRI applications. This phantom consists of following components: - Anatomically correct realistic skull - Anatomically correct brain phantom - Complex blood vessel structure with incorporated Circle of Willis - One bifurcation - One stenosis - Two aneurysms - Embedded...

Open the catalog to page 2
User Manual For Head Phantom - 3

The table below gives a brief idea about the type of the tissue used in making the phantom and it also includes the properties associated with it. The units of measurement may vary from type to type. Table 1. Specifications of the full head phantom

Open the catalog to page 3
User Manual For Head Phantom - 4

III. Three (3) Dimensional views / Image(s) of the full head phantom Below are few detailed 3D images of the phantom. These images are labelled accordingly and they give a descent idea of the flow of blue, red and green vessels structured within it. It also represents the perspective view of the full head phantom stating the sizes of the diameter of different vessels used in making it. * Pink objects - 3mm diameter * Blue objects - 2mm diameter * Green objects - 1mm diameter * Yellow objects - 0.5m diameter ■ 0.5mm inner complex vessel (entry) ■■ 0.5mm inner complex vessel (exit) 3mm main...

Open the catalog to page 4
User Manual For Head Phantom - 5

The phantom is fabricated based on the anatomy of real human head and it can be scanned in supine, prone and fowler’s positions, more importantly, scanning can be performed from multi directions (as highlighted in the image below). • For ultrasound applications, this phantom can be scanned either by using ultrasonic gel or simply in a water tank. • For MRI applications, the artificial blood vessels can be filled with any common MRI contrast agents. Filling the phantom with blood mimicking fluid The phantom can be filled with most type of blood mimicking fluids using syringe or water pump....

Open the catalog to page 5
User Manual For Head Phantom - 6

• The phantom is made of urethane-based material and it should be protected from a direct exposure of any strong UV light. • The experiments conducted on phantom can be performed in a sunny lab but it is not recommended to leave the phantom under direct sunlight for weeks or months. If the phantom is not in use, we strongly recommend storing it in a dry and dark place. d. Cleaning • The phantom is water resistant and it can be cleaned after its use. It is ideal to clean it either with water or with soapy water. • The phantom is relatively resistant to chemicals but if stronger solvents are...

Open the catalog to page 6

All True Phantom Solutions catalogs and technical brochures

  1. Full Body

    10 Pages

  2. R&D Phantoms

    41 Pages