TRUE PHANTOM SOLUTIONS User ManualAdult Pelvis with Organs for X-Ray CT, US [PE-A03] VERSION 2.4 ■ 1 May 2026 [email protected] ■ www.truephantom.com

TRUE PHANTOM SOLUTIONS INC.

TRUE PHANTOM SOLUTIONS INC. Description The Adult Pelvis with Prostate Phantom is built based on an average adult human male anatomy. It is made out of realistic soft tissue-mimicking materials and patented synthetic bones suitable for X-Ray/CT and US imaging applications. It can be used as a tool to conduct medical imaging research, radiology training, testing, and calibration purposes. This product can be further customized to match our client’s specific requirements. The spine bones will consist of a realistic three-layered structure with inner porosity, which can be adjusted according to...

TRUE PHANTOM SOLUTIONS INC. Front View Lateral View Perspective View

TRUE PHANTOM SOLUTIONS INC. PE-A03 | User Manual TRUE PHANTOM SOLUTIONS INC. PE-A03 | User Manual Attenuation Measured at 2.25 MHz [dB/cm] Thermal Properties of Bone-Mimicking Tissue Thermal Volumetric Specific Thermal Conductivity Heat Capacity Diffusivity Specific Heat HU Values of the Tissue Mimicking Materials S.No. Tissue Type HU Value (average)

TRUE PHANTOM SOLUTIONS INC. PE-A03 | User Manual 6 Sigmoid Colon Wall 100 Soft tissue and organs: Composition of urethane-based soft resin Synthetic bones: Patented ceramic-reinforced epoxy-based composite material Phantom Size: 14 x 10 x 16 Inches, Weight: 49 Lbs (approx.). Shipment Size: 33 x 23 x 13 Inches, Weight: 88 Lbs (approx.) Adult Pelvis with Organs Phantom User Manual/Assembly Instructions 2-Year Warranty & Unlimited Customer Service Hard Carry Case (Optional)

TRUE PHANTOM SOLUTIONS INC. PE-A03 | User Manual The phantom is fabricated based on the anatomy of the real human body. It can be scanned per the standard protocols used while positioning a real person. The phantom can be put in horizontal and vertical positions for scanning purposes. Anterior, Lateral, and Posterior techniques can also be performed. • The phantom is made of urethane-based material and should be protected from direct exposure to any intense UV light. • The experiments conducted on the phantom can be performed in a sunny lab, but leaving the phantom under direct sunlight for weeks...

TRUE PHANTOM SOLUTIONS INC. PE-A03 | User Manual • The phantom is water-resistant and can be cleaned after use. It is ideal for cleaning it either with water or with soapy water. It is also quite resistant to chemicals, but if stronger solvents are meant to be used with the phantom, we recommend doing a small test on the bottom part of the neck or legs. The phantom should be placed on its belly, and the chosen solvent can be applied on a small, selected surface of the phantom for a few hours. If there is no visible effect on the phantom's surface, it is safe to assume that the phantom is resistant...