Time saving LiLLYMETER Radiometric device Provides precise measurement of blue spectre light intensity to ensure the optimum photothe-rapeutic treatment. "Concentrate on quality care and have costs under control" "TSE Simple handling & Easily legible display • Easily legible in any environment thanks to display illumination • The final measurement value remains on the display until the next measurement or until automatic switch-off when not used for one minute • One-button control Perfect optical system & Measurement accuracy • Measured values displayed in standard units - microwatts per square centimetre per nanometre (pW/cm2/nm) • Special sensor design minimises sensitivity to irradiance angle of incidence • Microprocessor electronics improves effectiveness and suitability for the purpose Safety & Calibration • LiLLY can be calibrated individually according to a standard corresponding to the National Institute of Standards &Technology (NIST) conditions • A Calibration Certificate is attached for reference in a hospital Easy cleaning • Smooth surface enables the unit to be wiped with disinfectants and prevents deposition of dirt Long battery life • Automatic switching off when not being used extends the operation time without battery replacement Power voltage Number of measurements with fully loaded battery Dimensions without sensor: height length width LiLLY Radiometer is only designed for light intensity measurement of LiLLY Phototherapeutic Lamp. Measured light wavelength Measurement accuracy Measurement range Calibration validity 400-550 nm ±10% ±2digit. Peak value (PEAK): 10-115 pW/cm2/nm Mean value (MEAN): 3-46 pW/cm2/nm 1 year