video corpo

5000 Series Mass Flow Multi-Meter Spec Sheet EN
4Pages

{{requestButtons}}

Catalog excerpts

5000 Series Mass Flow Multi-Meter Spec Sheet EN - 1

5000 Series Mass Flow Multi-Meter Thermal mass flow meters designed for gas flow measurement. TSI® thermal mass flow meters incorporate a proprietary platinum film sensor design for measuring gas flows in applications demanding fast response, low pressure drop, and high accuracy over a wide flow range. The 5000 Series incorporates bidirectional flow sensing, color touchscreen display, configurable tube end adapters, and companion PC software for all models. Advanced models can integrate mass flow, absolute pressure, temperature, volume, differential pressure, and humidity measurements into a single device as well as provide options for higher flow accuracy, data logging, or humidity compensated flow measurements. Applications Researchers, engineers, designers, and scientists use TSI® gas flow meters in a variety of applications such as: ▪ roduct Development P ▪ Manufacturing ▪ uality Assurance Q ▪ esearch R ▪ etrology M ▪ ield Service F Features and Benefits ▪ 4 millisecond bi-directional flow response ▪ High accuracy (±2% of reading, ±1.7% of reading optional) ▪ Wide dynamic operating range (1000:1 turndown ratio) ▪ Multiple gas calibrations available, user-selectable ▪ easure up to 6 parameters - flow rate, absolute M pressure,temperature, volume, differential pressure, and humidity ▪ emperature and pressure compensated, T optional humidity compensation ▪ 2.8 inch color touchscreen operation ▪ Display four measurement parameters simultaneously ▪ Configurable tube end connectors ▪ Data logging options ▪ USB power and data communications ▪ NIST-traceable Calibration Certificate included ▪ ll meters come with power supply, cables, tube end A connectors, inlet filte

Open the catalog to page 1
5000 Series Mass Flow Multi-Meter Spec Sheet EN - 2

High Flow Flow Measurement Gas Calibrations Air, O2, CO2, N2* (user selectable) Range to ±300 Std L/min 0 0 to ±100 Std L/min (CO2) The 5300 Series is TSI’s high flow thermal mass flow meter. The 5300 Series provides the ability to measure high flows with an ultra low pressure drop, measuring up to 300 L/min while minimizing flow back pressures and their impact on your system. These flow meters also have a lightweight, compact form factor when compared to other instruments that measure at similar flow rates. The 5300 Series is designed as a general purpose flow meter and is optimized for...

Open the catalog to page 2
5000 Series Mass Flow Multi-Meter Spec Sheet EN - 3

The 5200 Series is TSI’s low flow thermal mass flow meter. These flow meters provide increased resolution and accuracy at flow rates under 1 L/min. The 5200 Series flow body is designed with a reduced internal volume to minimize circuit dead space and provide highly accurate volume measurements. Low flow meters from TSI® are used as a flow reference for the calibration of sampling instrumentation as well as many other low flow applications. 5200 Series Pressure Drop Flow Measurement Gas Calibrations Air, O2, CO2, N2* (user selectable) Range to ±30 Std L/min 0 Accuracy (by model number)...

Open the catalog to page 3
5000 Series Mass Flow Multi-Meter Spec Sheet EN - 4

5000 Series Flow Multi-Meter Temperature Measurement Range -10 to 50°C Instrument Temperature Range Response 75 ms to 63% of final <= value for step change Instrument Pressure Range Accuracy ±1°C at flows > 1 Std L/min (in forward direction only) Burst Pressure Tested to 690 kPa without rupture. DO NOT exceed 690 kPa. Units hPa, kPa, mbar, PSI, Pa, mmHG, cmH2O, inH2O Digital Output USB, RS-232 Serial using an optional USB-A to RS232 converter cable Relative Humidity Measurement 10-90% RH 2.8 inch Color LCD Touchscreen Response 3 seconds to 63% of final <= value for step change Units...

Open the catalog to page 4

All TSI catalogs and technical brochures

  1. BIOTRAK®

    2 Pages

  2. SidePak AM520

    92 Pages