Catalogs >
TSI >
AeroTrak®+ 7010 Remote Active Air Sampler spec sheet

AeroTrak®+ 7010 Remote Active Air Sampler spec sheet
2Pages

Catalog excerpts

AeroTrak®+ 7010 Remote Active Air Sampler spec sheet - 1

AEROTRAK®+ REMOTE ACTIVE AIR SAMPLER MODEL 7010 TSI® AeroTrak®+ 7010 Remote Active Air Sampler (AAS) offers aseptic manufacturers confident and reliable microbial monitoring in pharmaceutical manufacturing Grade A and B environments with external vacuum systems. With active flow measurement and proactive flow alarms, the AAS allows cleanroom technicians to RELIABLE MEASUREMENT CONFIDENT RESULTS correct facility conditions before monitoring is affected to reduce production waste. The AAS integrates into TSI Facility Monitoring Software to put critical data at your fingertips – without worry of data interruption or loss. Features & Benefits RELIABLE MEASUREMENT + asy compliance with FDA cGMP and EU GMP regulations E by way of low d50 (0.8 µm) and active flow measurement + uick corrective action driven by real-time flow measurement Q warnings—e.g., kinked tubing, vacuum loss, etc. + esign specific for Grade A and B environments with traceable D materials and thoughtful accessories + educed interventions to change agar plates through R intermittent sampling CONFIDENT RESULTS + omplete environmental monitoring system by TSI with C integrated total particle and microbial monitoring + assle-free data integrity with FMS Software integration H and automated, sample-based reporting + ecure shareability—OPC UA interface to LIMS S + istributed architecture without common points of failure D + o lost data—sampling completes even if network fails N UNDERSTANDING, ACCELERATED CONFIDENT, RELIABLE, NO-HASSLE COMPLIANCE & DATA INTEGRITY TSI Complete Facility Monitoring Systems Learn more at www.tsi.com/relia

Open the catalog to page 1

AeroTrak®+ 7010 Remote Active Air Sampler spec sheet - 2

SPECIFICATIONS AEROTRAK®+ REMOTE ACTIVE AIR SAMPLER MODEL 7010 Flow Rate 28.3 LPM (1.0 CFM) with ±5% accuracy Weight Sample Head Control Box Sampling Method Sieve impaction Vacuum Source External vacuum > 15 in. (38.1 cm) of Hg Power Power-over-Ethernet (PoE compliant with IEEE 802.3at) or 12-24 VDC @ 30W Relay Load 0.5 A at 125 VAC; 2 A at 30 VDC Overvoltage Category II Storage Range Stainless steel Sample Head (Base and Cap) 316L SS Recommended Tubing (Between Sample Head and Control Box) Included Accessories Power connector, 90 mm plate standoffs, and operating manual and configuration...

Open the catalog to page 2