Catalogs >
TSI >
DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN
4Pages

Catalog excerpts

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN - 1

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN ENCLOSED LABORATORY UNDERSTANDING, ACCELERATED

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN - 2

FEATURES & BENEFITS Supply Thermal Flow Station Damper Reheat Coil Increased safety + Flow measurements with best in class +/- 3% accuracy + Closed Loop Control of fume hood face velocity, room air flows and room pressure differential - Sidewall sensor actually measures fume hood face velocity for user safety - Offset room control with adjustment based upon actual pressure measurement maintains containment Energy savings + VAV control reduces airflow + Low-pressure drop dampers, as recommended by US EPA, reduce fan energy Pressure Sensor ENCLOSED LABS ++Door is normally closed ++VAV reduces...

Open the catalog to page 2

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN - 3

Room Controller General Thermal Flow Station Exhaust Damper Hood Exhaust Damper Thermal Flow Station Sidewall Sensor Fume Hood Controller ROOM BALANCE AND ROOM PRESSURE CONTROL SEQUENCE OF OPERATION VENTILATION CONTROL SEQUENCE OF OPERATION The room controller continuously maintains a constant flow offset minimum setpoint. between supply and exhaust volumes. If the offset becomes too large, The room controller maintains the supply air volume at or above its closes the general exhaust and then opens the supply to its maximum TEMPERATURE CONTROL SEQUENCE OF OPERATION setpoint. If the offset...

Open the catalog to page 3

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN - 4

FUME HOOD CONTROLLER SEQUENCE OF OPERATIONS The fume hood controller continuously measures average fume hood face velocity using a sidewall sensor. If average face velocity rises above setpoint, the fume hood controller will reduce the exhaust volume until face velocity setpoint is achieved. If average face velocity drops below setpoint, the fume hood controller will increase exhaust volume until face velocity setpoint is achieved. During unoccupied mode, the fume hood controller will maintain face velocity at setback setpoint. UNDERSTANDING, ACCELERATED TSI Incorporated - Visit our website...

Open the catalog to page 4

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN 4Pages

Catalog excerpts

All TSI catalogs and technical brochures

DRIVING SAFETY THROUGH EFFICIENT LAB DESIGN
4Pages