Your Sterilization & Infection Control Partners Laboratory Line Large Steam Sterilizers for the Life Sciences

Large Steam Sterilizers for the Life Sciences Sterilization in a laboratory environment has its unique requirements. The types of loads that need to be sterilized are varied and include liquids, glassware, instruments, porous loads and additional laboratory items. Choosing the right steam sterilizer depends on several considerations: the type of loads, frequency of use, available services and load volumes. The Tuttnauer line of large capacity sterilizers successfully meets the challenges posed by sterilization in laboratories and research institutes. The sterilizers use pre-vacuum and gravity...

Designed to Handle Diverse Load Types Fast Cooling The Tuttnauer line of laboratory sterilizers can handle a variety of load types. The sterilizer is provided with a total of 12 programs that range in temperature from 105°C - 137°C. If needed the number of programs can be increased. Standard programs are set to handle: After sterilization is attained, the autoclave door cannot be opened • Sterilization of Liquids • Unwrapped instruments and glassware • Wrapped instruments, packs and utensils • 2 test programs: Bowie & Dick and Vacuum Test All programs are fully programmable to suit the specific...

Improved Air Removal Advanced Options Vacuum Cycles The advanced options are designed specifically for use in clean steam systems that demand sanitary conditions be maintained. They are designed to satisfy the stringent requirements of the food processing, pharmaceutical and biotechnology industries.  The sterilizer’s vacuum pump efficiently removes residual air prior to sterilization, enabling effective penetration of steam. The post-vacuum drying phase, at the end of the sterilization cycle, ensures complete drying of porous loads and hollow instruments. This guarantees that even the most difficult...

Waste Treatment Facilities and Biosafety Autoclaves used in laboratories and animal care facilities that are classified as Bio-safety Level 4 must have a pass-through double door sterilizer, with interlocks that provide protection against the passage of potentially contaminated materials to the surroundings. A bio-seal must be installed and maintained around the unit at the containment barrier to seal the space. Tuttnauer supplies full sterilization solutions for the treatment of bio-hazardous materials and waste. Tuttnauer sterilizers can be customized to meet the specific requirements of laboratories...

Quality Engineered with People in Mind Quality features enable the convenience and durability needed to operate an autoclave with complete peace of mind. The fully jacketed chamber is constructed from long lasting 316L/Ti grade stainless steel with superior corrosion resistance. The generator and piping are constructed of stainless steel. The pneumatic valves significantly reduce maintenance. They are safer and more reliable, eliminating the requirement for high voltage. Furthermore, if no buttons or switches are operated for four hours, the autoclave will switch to standby mode. Two Validation...

Safety Safety is Our Top Priority Our safety features ensure functionality and a worry-free work environment which results in reduced downtime. Door Safety The autoclave doors are designed with a number of independent mechanical and digital safety features. This guarantees that if a problem should occur, an autoclave failure will be prevented. • A safety device prevents the operator from opening the door when chamber is pressurized • Steam is not allowed into the chamber when the door is open • A cycle cannot start if the door is open or not properly locked • The door cannot unlock until chamber...

A Flexible Range of Sizes and Models Tuttnauer offers an unmatched range of models that are available in three series: Compact, Mid Range and Large Capacity. The sterilizer chamber ranges in size from 120 to 1015 liters. Additionally, we design tailor made solutions and nonstandard chamber sizes to accommodate special needs. Each model is available with either single or double door. In addition to the laboratory line Tuttnauer offers the T-Max line of sterilizers with chamber sizes which comply with the European StU (Sterilization Units) requirements. The 44 and 55 Compact Series Tuttnauer Small...

The 66 Mid Range Series Tuttnauer Medium Laboratory Autoclaves with chamber volumes from 340 to 600 liters. The 66 series is available with the following door options: • Fully automatic vertical sliding door • Hinged door with automatic locking. Tuttnauer offers 5 different models: Model Chamber Dimensions (WxHxD) mm Chamber volume (Liter) 6690 610x610x915 340 66120 610x610x1215 450 6671130 660x710x1295 610 6671162 660x710x1620 760 Vertical Sliding Door Automatic Hinged Door 9

The 69 Large Capacity Series Tuttnauer Large Laboratory Autoclaves with chamber volumes from 510 to 1010 liters. The 69 series is available with the following door options: • Fully automatic horizontal sliding door • Hinged door with automatic locking. Tuttnauer offers 4 models: Model Chamber Dimensions (WxHxD) mm Chamber volume (Liter) 6990 610x910x915 510 69120 610x910x1215 680 69150 610x910x1515 840 69180 610x910x1815 1010 Automatic Hinged Door Horizontal Sliding Door 10

Additional Options Loading Equipment Our loading equipment assists the loading and unloading process. It is made of high quality, durable stainless steel. We offer two options:   • Pull Out Trays- Stainless steel trays equipped with rails for easy loading and unloading. The rails are designed to prevent the trays from rolling over. • Loading Cart and Transfer Carriage - The height adjustable loading cart rolls off the transfer carriage onto the interior chamber rails for easy handling of heavy loads. The transfer carriage is equipped with swivel wheels, maximizing maneuverability in limited space....