Dialysis Valve, Direct Acting, NC Medium Separation by PTFE Bellow A. u. K. Muller Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: [email protected] Internet: www.akmueller.de Description Applications This valve series has been specially developed for use in haemodialysis machines and other medical devices. The design recognizes the specific requirements of this market. ■ Haemodialysis machines ■ Medical engineering ■ Water treatment ■ Disinfection equipment Special valve for haemodialysis machines Medium separated by PTFE bellow Function and leak tightness in both flow directions Plunger guided by PTFE High flow rate Various fixing options Suitable for pressure and vacuum operation Short cycle times High number of ON-OFF cycles Minimal dead areas in valve body Easy chemical disinfection Materials with worldwide approvals High operating safety by use of high quality materials Low power consumption CE - Marking UL and CSA certification on request Used as an inlet or outlet valve for the balance chamber of a dialysis machine, the valve will work in both flow directions across the complete pressure range. A variety of standard bodies are available to connect to the customer's balance chamber but customised versions can be produced. The use of high quality plastics and sealing elements made of EPDM ensure durability even with aggressive media such as dialysate, cleaning agents and disinfectants. The PTFE Bellows ensure a longer lifetime than a rubber membrane as it is less likely to become brittle. All materials meet EU, RoHS and REACH regulations. Typical Performance Curve

A. u. K. Muller Series U9x.60x Technical Data II Materials Valve body Plunger guide Plunger and spring Bellow Seal Coil coating PEI PPSU on request PEEK on request PTFE stainless steel PTFE EPDM FKM on request PBT, PET or epoxy resin Coil connections flat tabs 6,3 x 0,8 mm plug socket according to EN 175301-803 (IP65), several cable connections (IP65, IP68) Insulation class F according to EN 60730 Protection class III according to © copyright A.u.K. Muller, subject to changes without prior notice

A. u. K. Muller Series U9x.60x II Options Variant Length Height ID © copyright A.u.K. Muller, subject to changes without prior notice

Product Information Dialysis Valve, Direct Acting, NC Medium Separation by PTFE Bellow  © copyright A.u.K. Müller, subject to changes without prior notic

© copyright A.u.K. Muller, subject to changes without prior notice

A. u. K. Muller Series U9x.60x VII Other housing variants on request VIII Options Variant Length Height ID * applicable for John Guest connection © copyright A.u.K. Muller, subject to changes without prior notice

IX Options Variant Length Height ID © copyright A.u.K. Muller, subject to changes without prior notice

A. u. K. Muller Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: [email protected] Internet: www.akmueller.de © copyright A.u.K. Muller, subject to changes without prior notice