
Catalog excerpts

Product Information A.u.K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: info@akmueller.de Internet: www.akmueller.de MS 39 Characteristics medium completely separated from valve parts chemical resistance depends on the material of the tube selected tube can easily be changed no dead areas as in usual valve body flow in either direction coil can be fixed in any position through 360° function provides high reliability and run time The 3/2-way pinch valves of series 16.002.316 pinch valve series is equipped with a 8,0 W solenoid coil. Therefore, it exhibits a clamping force of 2,0 N and is applicable for flexible tubes with an outer diameter from 3,0 mm and a shore hardness of 50-60°. With these tubing specifications, pressures up to 1 bar can be switched. dosage systems laboratory analysis medical equipment vending machines chemical industry The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane which can cause turbulence in the fluid flow and create dead areas in the valve housing where medium or dirt can collect. Typical Performance Curve Silicone tube ID 2,0 x OD 2,8; 60°Sh; length 30cm Medium: Water at 25°C; free outlet p / psi The valve is particularly suitable for applications where a high level of hygiene is required. The resistance against chemicals depends on the selected material of the tube. Note: The volume flow always depends on the geometry and condition of the tube used. © copyright A.u.K. Müller, technical changes reserved
Open the catalog to page 1
aterials Valve body aluminium (surface refined) Fixing flange PA 66, glass fibre reinforced Plunger guide aluminium Plunger and spring stainless steel Coil coating PA 6, glass fibre reinforced Range of possible outer diameter (O.D.0) of tube: 2,8 - 3,0 mm. The wall thickness should not deviate from the one given in the upper table. The valve may only be operated with inserted tube. E2722 © copyright A.u.K. Muller, technical changes reserved
Open the catalog to page 2
Range of possible outer diameter (O.D.0) of tube: 2,8 - 3,0 mm. The wall thickness should not deviate from the one given in the upper table. The valve may only be operated with inserted tube. Coils Protection Protection Class Nominal voltages Type © copyright A.u.K. Muller, technical changes reserved
Open the catalog to page 3
A.u.K. Muller Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: info@akmueller.de Internet: www.akmueller.de © copyright A.u.K. Muller, technical changes reserved 4
Open the catalog to page 4All A. u. K. Müller GmbH & Co. KG catalogs and technical brochures
-
series 43.00x.xx6
6 Pages
-
Series 43.00x.182
4 Pages
-
Series 43.00x.122
4 Pages
-
Series 43.00x.102
4 Pages
-
Series U9x.60x
8 Pages
-
Series 92.609.xxx
4 Pages
-
Check Valves DN 6, 10, 15
4 Pages
-
3/2-way Lever Valve, DN 9
4 Pages