Series 43.00x.182

Series 43.00x.182

Series 43.00x.182

Product catalog summary
Product Overview: The document provides detailed information about the 2/2 way direct acting solenoid valve, specifically the Series 43.00x.182, which is normally open (NO) and designed for continuous operation with a duty cycle of 100%. These valves are suitable for use with neutral gases and liquids, and are media-separated to ensure durability and safety.
Specifications: The valve body is made of PEI, suitable for hot water applications. The plunger is stainless steel, and the membrane is made of EPDM, with options for FPM and VMQ on request. The coil is coated with PBT. The valve operates at a nominal voltage of 24 V DC, with a power consumption of 8.5 W, and is protected under insulation class F and protection class I according to EN 60730.
Technical Data: The valve is available in nominal diameters DN 2 and DN 4, with Cv-values of 1.8 l/min and 5.3 l/min respectively. The operating pressure ranges from 0 to 3.5 bar in the flow direction for DN 2, and 0 to 1.5 bar for DN 4. The valve can operate in ambient temperatures up to 60°C and media temperatures up to 98°C.
Applications: These valves are ideal for hot and cold drink dispensers, medical equipment, and water treatment systems. They are designed for easy assembly and servicing, with the ability to change the coil without opening the medium circuit.
Approvals and Options: Approved versions are available upon request, including KTW/W270. Various connector options are available, including John Guest cartridges and other combinations on request. The document notes that the applicability of John Guest connections at temperatures above 65°C should be verified for specific applications.
See more

Catalog excerpts

Series 43.00x.182-1

Product Information 2/2 way direct acting solenoid valve NO DN 2, 4 - media separated, duty cycle 100 % A. u. K. Müller Solenoid valves Control valves Special valves and systems A. u. K. Müller GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany e-mail: [email protected] Internet: www.akmueller.de Characteristics Direct acting Media separated by membrane Compact design Long term performance capability Suitable for food and hot water appliances Works from zero pressure Easy to assemble and service Coil change without opening of medium circuit, coil can be mounted 4 x 90° High operating safety through the use of high quality and 100% final testing of the product Hot / cold drink dispensers Medical equipment Water treatment systems Possible approvals 2/2-way solenoid valve of different nominal diameters for use with neutral gases and liquids. This valve is direct controlled and normally open (NO). Approved versions available on request: KTW/W270 Others on request Valves of this design are single chamber straight through valves, with nozzles or push fittings at outlet and inlet. The plunger is separated by a diaphragm from the medium and protected by its influence. The valve body is made of PEI, which is suitable for hot water applications. This valve is designed for continuous operation (duty cycle 100%). typical performance curve (Fluid) Electrical operating safety is achieved by using high quality materials of insulation class F and can be supported by an additional protection circuit. DN 2 © copyright A.u.K. Müller, subject to changes without prior notice

 Open the catalog to page 1
Series 43.00x.182-2

A. u. K. Muller Series 43.00x.l82 Technical Data 30 Materials Valve body Options Nominal orifice E1117 © copyright A.u.K. Muller, subject to changes without prior notice 2

 Open the catalog to page 2
Series 43.00x.182-3

John Guest cartridge The applicability of the John Guest connection to medium- or ambient temperatures higher then 65 °C is temporarily feasible, but has to be verified accordingly in the respective application. Options Nominal orifice Connector Inlet Outlet Length ID John Guest cartridge 6 6 * Membrane VMQ Other connector combinations on request. © copyright A.u.K. Muller, subject to changes without prior notice 3

 Open the catalog to page 3
Series 43.00x.182-4

Solenoid valves Control valves Special valves and systems A.u.K. Muller GmbH & Co. KG Dresdener Str. 162 D-40595 Dusseldorf/Germany Tel.: +49(0)211-7391-0 e-mail: [email protected] Internet: www.akmueller.de © copyright A.u.K. Muller, subject to changes without prior notice

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.