vascular pocket dopplers The UltraTec PD1v is a small, lightweight, high sensitivity pocket vascular doppler. Its vascular pencil probes are ideal for use by a general practitioner or vascular specialist for routine vascular examinations. Vascular flow signals are easily located using the lightweight narrow beam pencil transducer while internal signal processing minimises noise artefacts. The flow signal is also available to the user via the built-in loudspeaker or optional headset with output level controlled by rotary volume control. A chart recorder output is provided for the printing of non-directional waveforms. The unit is powered by a standard 9V battery. The UltraTec PD1cv is a lower cost vascular doppler alternative to the PD1v, it uses high sensitivity fixed frequency probes of the type used on the PD1combi doppler. There is an option of fixed 5MHz or 8MHz probes to cover most common arterial and venous applications. Vascular signals are provided via the built-in loudspeaker and optional headset, unlike the PD1v the PD1cv does not provide for a velocity output. PD1cv optional flat probe PD1v additional features q Lightweight unit with pencil probe q 5 or 8MHz probes q 5 or 8MHz flat probe available q Velocity output Technical Specification Ultrasound Frequency (PD1 / 1+ / d wr) ˆ Frequency (PD1combi / v / cv) Transducer Output power Audio response Fetal heart rate (PD1+ / d wr) ˆ Outputs 2 MHz continuous wave 5 or 8 MHz continuous wave** 2 crystal narrow beam <15mW/cm2 SATA 300Hz – 1KHz Multipoint real time autocorrelator Unit Controls Keys Controls Indicators (PD1 /combi / v / cv) Indicators (PD1+ / d wr) ˆ 1 Key (for unit on/off) Rotary volume Yellow battery low LED 3 digit FHR LCD display / FHR pulse icon / Battery Low icon Power Supply Battery MN1604 (PP3) 9V Alkaline Manganese Expected battery life (PD1 /combi / v / cv) >9 hours Expected battery life (PD1+ / d wr) ˆ >6 hours Headset Serials (PD1+ / d wr) ˆ Recorder (PD1v) Audio output to optional headset RS232 interface to optional UltraTrace 2 PC software Voltage output proportional to velocity of flow Enclosure Material Size Weight ABS 150mm by 75mm 295g typically including transducer Safety Classification Specification applies to all units unless otherwise indicated ** The PD1v and PD1cv are supplied with a fixed transducer – the frequency must be specified at the time of ordering. Specification subject to change without notice For more information contact Ultrasound Technologies Ltd Lodge Way, Portskewett, Caldicot NP26 5PS South Wales, UK Telephone +44 (0) 1291 425425 Fax +44 (0) 1291 427093 Email: [email protected] Webpage: www.doppler.co.uk

fetal pocket doppler All of the UltraTec PD1 range of pocket dopplers are small, lightweight and supplied with a range of high sensitivity probes for obstetric and vascular applications. The UltraTec PD1 is a small, lightweight, high sensitivity pocket doppler. Its 2MHz fetal doppler probe is ideal for use by general practitioners or midwives for routine antenatal fetal detection. Each doppler shares the following common features: Fetal signals are easily located using the lightweight narrow beam transducer while internal signal processing minimises noise artefacts. q Lightweight unit and probe...