UNAwheel Maxi User Manual

Contents Preface4 Compliance5 Copyright & Disclaimer 1.4 Icons & Symbols used in this manual 3.3 Adapter’s placement. Option 1: Wheelchair front tubes 3.4 Adapter’s placement. Option 2: Frame under the wheelchair seat 23 4 Attaching & Detaching the UNAwheel Maxi 4.1 Attach the UNAwheel Maxi 4.2 Detach the UNAwheel Maxi 6.2 Remove the battery for air transportation

The UNAwheel Maxi power add-on is a high-quality versatile product for everyday life. Its defining characteristics are: • Powerful 450W brushless gearless motor • Maximum speed of 20 km/h (the device can be speed-limited to comply with local regulations) Maximum range of 25 km Max. climbing ability of 14% (8°) Battery type is Lithium Ion 36V 8Ah 288Wh Easy to use controls and LCD display Adjustable frame width Maximum load capacity of 120 kg (264 lbs) Total weight of 13kg The safest speed mode can be picked out of 5 speed modes available (max. 6 km/h, max. 12 km/h, max. 18 km/h, max. 20 km/h,...

Copyright & Disclaimer The information in this document is subject to change without prior notification. This user manual is intended for users and owners of the UNAwheel Maxi. It contains all the information necessary to use the UNAwheel Maxi safely and successfully. All rights reserved. Nothing in this material may be simplified, modified or translated without prior written permission from UNAcare Pte. Ltd., apart from insofar as permitted under the Copyright Act. The only guarantees for UNAcare products and services are set out in the warranty documents that are provided with the products...

The power add-on should be able to cope with tarmac surfaces and firm paths with different topography. Avoid driving on unpaved or loose surfaces (e.g. on loose gravel, in sand, mud, snow, ice or through deep puddles of water), as this may expose the user to unforeseen risks. 1.4 Icons & Symbols used in this manual WARNING Risk of serious or fatal injury or severe product damage. Risk of injury or product damage. Useful information unrelated to safety. We herewithin advise, that using the UNAwheel Maxi max. speed settings higher than 6 km/h is only permitted on public roads in certain countries...

In the (unlikely) event of the battery pack overheating or catching on fire, you must ensure that the battery pack does not come into contact with water or other liquids. The only suitable extinguishing agent that is recommended by the battery manufacturers is sand. Before each trip, the wheelchair user must decide whether it is safe to drive the power assist, based on a few factors such as driving experience and physical strength. Users drive through the hazardous areas listed below at the their own discretion and risk. — Quay walls, berths and marinas, paths and areas near water, bridges Switch...

1.7 Storage & Transport CAUTION Store the product charged. Check the battery level every 3 months. If it’s less than 50% please charge the device. The temperature during transport and storage must remain between 0°C (32°F ) and 25°C (77°F). The product must be switched off during transportation. Switch off the UNAwheel Maxi before attaching or detaching. Do not clean the device under the water jet or using a water hose or any high-pressure cleaning machine.Prevent water from getting into the motor, battery and electronics. Do not use scouring agents to clean the product. Charge the product in...

2.2 Technical specifications Total weight The UNAwheel Maxi is a wheelchair power add-on that provides wheelchair users with a power boost. It is designed for people who are unable to walk but who are able to use a wheelchair independently. Thanks to its simple attachment mechanism, adjustment possibilities and modular design, the UNAwheel Maxi can be used by wheelchair users with different types of mobility impairments. Lithium Ion 36 V, 8 Ah, 288 Wh (allowed for air transportation) Braking type The UNAwheel Maxi is powerful enough for both indoor and outdoor driving. Public roads speed The...

3.1 Delivery contents The UNAwheel Maxi is delivered in one package: UNAwheel Maxi Charger with EU, UK, USA and AU cables Adapter with several fittings Battery travel case Tools The adapter consists of the following parts: A. central adapter B. curved tubes (x2) C. clamps for 19–30 mm (3/4″ — 1–1/8″) frame (x2) D. clamps for 32–35 mm (1–1/4″ — 1–3/8″) and oval frame (x2) E. spacers for 19–20 mm (3/4″) frame (x2) F. spacers for 22 mm (7/8″) frame (x2), plastic G. spacers for 25 mm (1″) frame (x2), plastic H. spacers for 32 mm (1–1/4″) frame (x2), rubber I. spacers for Quickie oval frame (x2),...

3.2 Requirements The adapter can be mounted either on the wheelchair front tubes or on the frame under the seat. To determine which placement fits your wheelchair, see the following requirements: Wheelchair front tubes Wheelchair under seat frame The wheelchair has a rigid or folding metal frame and non-detachable leg supports The wheelchair has swing-away and detachable leg supports The wheelchair’s front tubes have a vertical straight part of 40 mm (1–1/2″) at a height of 270 — 350 mm (10–1/2 — 14 inch) above the ground The width between the centers of frame tubes is 321 — 500 mm (12–5/8″ —...

4 Place the clamps at a height of approx. 30–35 cm (11–14″) above the ground. The height on the right side should be the same as the height on the left side. Use a ruler. 3.3.2 Assemble the central adapter 1 Loosen 8 bolts of the central adapter. Use a 5 mm Allen wrench. 5 Loosen the third bolt of each clamp. This allows you to rotate the clamps’ brackets. 6 Rotate the the clamps’ brackets so they are positioned at an angle of approx. -10° relative to the floor. Make sure the clamps’ brackets face forward. 2 Insert the short ends of the curved tubes approx. 5 cm (2″) into the central adapter....