ATMOS Pipette Accuracy Tester THE REVOLUTION for pipette testing • Works exclusively with air • Results in less than 30 s • Leak measurement • High accuracy • Stan

Do you know the current condition of your pipettes? For sure, you send in your pipettes regularly for calibration service. But do you know what happens in between? With ATMOS you can test your pipette: • on a daily basis • for accuracy and leakage • in less than 30 seconds • without liquid Always consider: • • • • pipettes are high performance instruments they are the starting point of your experiment they require regular testing to ensure correct functioning you want to avoid using pipettes that might produce questionable results With ATMOS, you can test your pipette for accuracy and leakage...

1 Select test volume Quick pipette testing in 4 simple steps The daily check of the accuracy of your pipettes with ATMOS allows a continuous monitoring of performance between the usual calibration procedures. ATMOS is measuring, in dry conditions, the exact displacement volume as well as the leak of the pipette. The measurement data are stored in the instrument and can be downloaded on a computer for long-term pipette performance monitoring. 4 Read volume and leak Advantages at a glance : • Quick and simple procedure • No liquid handling • ATMOS is factory-calibrated, no need for re-calibration...

Test your pipettes between calibration cycles With ATMOS, you can easily test your pipette between calibration cycles. Normal wear and tear causes shifts in the pipette‘s performance. You want to make sure that you monitor these changes, so you avoid using pipettes that might produce questionable data. After all, it is your experimental result that is affected. ReadATMOS Pipette monitoring software The ReadATMOS software facilitates the download of the stored data from the ATMOS device. Data is then displayed in Excel®-files, so you can easily analyze and further use them. Documentation and observation...

For single-channel and multiple-channel pipettes ATMOS is available for single-channel pipettes and 8-channel pipettes. With both versions, you get the same level of information. Even for your 8-channel pipette, you get data on volume and leakage for each individual channel. You can thus easily identify e.g. defective pipette tips or generally a mis-functioning pipette. More than pipette testing ATMOS not only measures the accuracy of your pipette, but also is a helpful assistant for daily laboratory calculations. ATMOS will support you in: • Molarity calculations • Dilution calculations • Serial...

Technical specifications: Dimensions 125 x 85 x 30 mm Weight 420 g Power supply 5V DC, 2A, USB-C connector Battery 2000 mAh, Li-Po Operational temperature from 10 °C to 40°C Altitude from sea level up to 3500m Layout: www.mees-zacke.de, Photo: www.benjaminkrohn.de UniPix GmbH Eisenbahnstrasse 63 72072 Tübingen Germany [email protected] www.unipix-atmos.com