*mymedicalexpo

plato

1 / 2 PagesView full catalog

plato

Product catalog summary

Emergency Stop Button: Used to halt unexpected behavior immediately.

Speakers (1W): Facilitate communication and greetings while fulfilling orders.

LED Lights (360° view): Indicate different statuses through various colors.

Bumper: Absorbs impact in minor collisions and stops the robot if necessary.

Sensors: Equipped with 3 depth sensors, class 1 lasers, and infrared for location mapping and object detection.

Embedded Screen (10.1 inch touchscreen): Allows staff to input orders by touch and displays facial expressions.

Lidar: Certified PLB 220° light detection and ranging for distance measurement and collision avoidance.

Shelves: Top and mid shelves have a 10kg weight sensor each, while the bottom shelf has a 20kg weight sensor.

Buttons: Includes a top button to skip or return home, two side buttons to pause and resume, and a power button for manual/automatic mode.

Energy: Features a removable battery and charger hatches.

Weight & Payload: The robot's empty weight is 53 kg, with a maximum payload of 30 kg distributed across the shelves.

Dimensions: Length: 545.5 mm, Width: 500 mm, Height: 1113.1 mm.

Working Environment: Operates in temperatures from 5°C to 40°C and humidity from 20% to 85% non-condensing. Maximum mapping area is less than 300 m².

Navigation: Maximum speed is 2.6 km/h. Requires a minimum corridor or door width of 65-70 cm. Cannot navigate slopes or steps.

Power: Input voltage is 30 VDC with an input current of 8 A. Charger input voltage ranges from 100 to 250 VAC.

Battery: Varta 7S12P Ion-Lithium battery with 38.4 Ah / 995 Wh capacity. Charging time is approximately 7.5 hours, with a discharge time of 12 hours depending on use.

Radio Module: Supports 802.11n/ac 2X2 MU-MIMO 2.4GHz/5GHz WiFi and Bluetooth Low Energy 5.x.

Product Safety: Complies with various safety and EMC directives, including ISO 12100, ISO 13849, IEC 60204-1, and ISO 13482.

Protection Class: IP42, providing protection against tools and small wires larger than 1 mm and water spray at a maximum 15° angle.

Certifications: Includes RoHS and WEEE compliance, with additional certifications for food contact and battery safety.

Legal Mentions: Manufacturer reserves the right to make changes without notice. Documentation is available online.

Catalog excerpts

Emergency Stop Button To stop unexpected behaviour Total max capacity: 30kg Top Button Embedded Screen Top Shelf 10kg weight sensor (1W) To communicate and greet while fulﬁlling the orders Two side Buttons To pause and resume 3 x depth sensors, lasers class 1 and infrared to map the location and detect objects. Power Button (360° view) Different colors for indication of different status. To absorb impact in a minor collision and stop the robot if need be Certiﬁed PLB 220° light detection and ranging to measure distances and avoid collision. Manual/Automatic Mode Button Bottom Shelf Removable Battery & charger hatches (10.1 inch touchscreen) To get orders from staff by touch and to show facial expressi

Open the catalog to page 1

Weight & Payload Certiﬁcation & Technical speciﬁcations Product safety Plato is compliant with: RoHS (Restriction of hazardous substances in electrical and electronic equipment). WEEE (Waste Electronic and Electrical Equipment). Machinery directive ISO 12100 & ISO 13849 & IEC 60204-1 & ISO 13482 - Risk Assessment & Design These robots typically perform tasks to improve the quality of life of intended users, irrespective of age or capability. It describes hazards associated with the use of these robots, and provides requirements to eliminate, or reduce, the risks associated with these hazards...

Open the catalog to page 2