Dental Resin zDental Clear Aligner A printing resin which can directly print orthodontic sleeve models. It provides the high precision, and has the characteristic of shape memory. It is light yellow liquid, but magically the printing models become colorless and transparent after post curing. 1. Suggested Printing Parameters For NBEE Layer Thickness /mm Initial Layers Transition Layers Exposure Time /s Cool Down Time /s Motor Speed / mm/min Rise Height /mm Shrink Internal /mm Shrink External /mm Offset X Offset Y LED Power Tensile Strength Tensile Modulus Flexural Strength Flexural modulus Unnotched izod Tested by NBEE printer, layer thickness is 100um. Post-cured by Cure M with 5 minutes on level 3. 3. Storage Stored in dark place where avoid direct sunlight or any kind of UV light, environment temperature is suggested around 5 to 30℃，and environment humidity is less than 45%RH. The information and data stated herein are based upon tests in our lab and are considered to be reliable and accurate. Use by customers should be tested by themself firstly. This information and data are used for reference only, no warranty as a legal b

Dental Resin 4. Precautions 1） After the resin is poured into the resin tank, let stand still for 5 to 10 minutes before start a print job. 2）The good using temperature for this resin is 18-28℃. Use the resin away from direct sunlight or any kind of UV light. 3） After the model is printed, please take it out in time and wash it with 95% concentration alcohol. Using an ultrasonic cleaner, the cleaning time depends on the size and complexity of the model, but the time should not be too long, otherwise the structural performance of the model will be reduced, what is no more than 2 minutes is suggested....