Dental Resin zDental Night Guard A fast-printing resin used for night anti molars protective sleeve. It provides the high precision, and good details. Besides, it has a balance between good flexibility and strength. 1. Suggested Printing Parameters For NBEE Layer Thickness /mm Initial Layers Transition Layers Exposure Time /s Cool Down Time /s Motor Speed / mm/min Rise Height /mm Shrink Internal /mm Shrink External /mm Offset X Offset Y LED Power Flexural Strength Flexural modulus Tested by NBEE printer，layer thickness is 100um. 3. Storage Stored in dark place where avoid direct sunlight or any kind of UV light, environment temperature is suggested around 5 to 30℃，and environment humidity is less than 45%RH. 4. Precautions 1） Before use, shake the resin bottle well for 5-10 minutes to make the resin uniform. After the resin is poured into the resin tank, let stand still for 5 to 10 minutes before start a print job. 2）The good using temperature for this resin is 18-28℃. Use the resin away from direct sunlight The information and data stated herein are based upon tests in our lab and are considered to be reliable and accurate. Use by customers should be tested by themself firstly. This information and data are used for reference only, no warranty

Dental Resin or any kind of UV light. 3） After the model is printed, please take it out in time and wash it with 95% concentration alcohol. Using an ultrasonic cleaner, the cleaning time depends on the size and complexity of the model, but the time should not be too long, otherwise the structural performance of the model will be reduced, what is no more than 2 minutes is suggested. 4） After the model is cleaned, immediately blow it dry with an air gun and post cure the model with a UV light，the post-curing time is depended on the curing machine. 5 ） It’s not recommended to leave the resin in...