KNEE Instrument Disassembly and Specific Cleaning Manual
48Pages

KNEE Instrument Disassembly and Specific Cleaning Manual

Clinical Cleaning – Graphical Symbols Pictogram Title Description Direction in general Direction of the motion or force (push, pull and bend) Alternative directions in general Two-way direction of the motion or force. Limited rectilinear motion To indicate limited rectilinear motion. Direction of continuous rotation To indicate that a control, or an object by means of a control, can be moved in a clockwise rotary motion. Limited rotation To indicate limited rotary motion in a clockwise direction. Rotation in two directions To indicate that a control, or an object by means of a control, can...

Tap water flush To identify an open water tap or connection or the control to open up the water supply. Spraying Spraying use syringes, pipettes and/or water jet. Rotary brush ISO 7000 / IEC 60417 / Use the Pipe brush or Test tube brush with threading or twisting 0307 motion. Locking To identify on a control that a function is locked or to show the locked status. Unlocking To identify on a control that a function is not locked or to show the unlocked status. Manufacturer Indicate the medical device manufacturer, as defined in EU Directives 90/385/EEC, 93/42/EEC and 98/79/EC. Authorized...

C-ring Feature The illustration is show Distal Femoral Plate and EM Alignment Tower. Turn C-ring, but do not push hard.

Slot and Hole Feature The illustration is show Distal Femoral Cutting Guide and Femoral A/P Chamfer Cutting Guide. Flush and brush each hole and slot.

Slide Feature Spike and Tibial EM Guide Extractor EX. 9303-5101 Chamfer Guide Extractor EX. 9303-5301

Both Sides

Cleaning 1 3 Cement residues

Femoral IM Alignment Guide EX. 9303-2105 EX. 9303-2111-RA EX. 9303-2706 1 Jagged surface

Femoral IM Alignment Guide EX. 9304-2101 Assembly after cleaning

Femoral Sizer, Anterior Reference EX. 9301-2285 EX. 9301-7101 EX. 9303-7101～7101-RE Flush and spray small gaps. -7-

Femoral Sizer-A/P Resection Guide EX. 9304-7101 Unlock with the Screw driver 9304-1102 Be careful about flush and spray small gaps.

Femoral Valgus Adaptor EX. 9303-5333-RB～5334-RB

Steel Ball

MB Tibial Insert Trial Adaptor EX. 9403-5105

Offset Adaptor Trial EX. 2903-2030 Utilize Screw Driver Adaptor to loosen and tighten.

On Set Patellar Resection Guide EX. 9404-2301 EX. 9404-2301-RA Push to unlock and repeat action the handle. Flush and spray small gaps. -16-

Patella Clamp EX. 9404-5305 Push to disassemble the front part. Push to unlock and repeat action the handle. Flush and spray small gaps.

Patellar Reamer Stopper EX. 9401-4205 Disassembly & Assembly

Patellar Resection Clamp EX. 9401-5302-RB Pull back to unlock Repeat action the handle. Push to unlock the front part Jagged surface Flush and spray small gaps. -19-

Deep Hole

Beware the gap. ( Both sides ) Flush and spray small gaps. -22-

Acute Angle

O-ring Deep hole

Stem Trial Driver EX. 9303-1101

Steel Ball and Hole Flush and spray small gaps. -26-

Tibial Baseplate Driver EX. 9403-5101 EX. 9403-5101-RC

Tibial Baseplate Trial Handle EX. 9403-1202 EX. 9404-1102 Tibial Sizing Template Handle EX. 9403-1203 Spring Tibial sizing template handle need to specially clean is same with Tibial baseplate Trial Handle. Flush and spray small gaps. -28-

Tibial EM Alignment Guide EX. 9403-2104-RA Disassembly Assembly

Deep Hole

Tibial EM Alignment Guide EX. 9404-2101

Tibial EM Alignment Guide EX. 9403-2108 Disassembly Assembly

Deep Hole

Tiblal IM Alignment Guide EX. 9403-2103 EX. 9403-2103-RA EX. 9403-2310 Cleaning Disassembly

Tibial Insert Trial Handle EX. 9404-1103

Tibial Punch Handle EX. 9403-1101 EX. 9403-1101-RC EX. 9403-1102-RC

Tibial Punch Handle EX. 9404-1101

© 2021 United Orthopedic Corporation. UOC-UM-UN-00031. Rev.2 JAN.2021