RepliCase Hip Surgical Technique Guide
9Pages

Surgical Technique Guide

Surgical Protocol

United Orthopedic Device Description RepliCase Hip – The RepliCase Hip is used for molding a temporary hip prosthesis during surgery, and is intended to allow surgeons to model a temporary hip prosthesis in a simpler way. The reinforcement rod provides additional mechanical support. INDICATIONS The device is indicated for use to mold a temporary hip prosthesis for skeletally mature patients with the following conditions: 1. he first stage of temporary implantation of infected skeletally mature patients who need to undergo a two-stage total hip T revision procedure. 2. Compliant patients who...

United Orthopedic Product Overview - Total hip spacer design helps provide a smoothly articulated surface intended to reduce wear particles and improve hip motion Medical Grade Silicone - he RepliCase Hip is made of medical T grade silicone which allows for repeated autoclave cycles Reinforcement Rod - rovides additional mechanical support P

United Orthopedic Surgical Overview C. Femoral Cement Spacer Shaping B. Bone Cement Preparation D. Femoral Cement Spacer Materialization E. Acetabular Spacer Cup Preparation

United Orthopedic A.Size Selection C.Femoral Cement Spacer Shaping Measure the acetabular size and choose the proper size of Cement Spacer Mold. Fill the Cement Spacer Mold when bone cement is in the doughy stage. The Reinforcement Rod is recommended to enhance the mechanical strength. Measured Acetabular sizes (mm) Spacer Cup Cement Mantle (each side) Suggested sizes Note: acetabular sizes under 50 mm, the acetabular spacer cup may not be necessary, size For selection should be based on the head diameter. B.Bone Cement Preparation Prepare 80 to 120g of bone cement for a femoral spacer....

United Orthopedic E. Acetabular Spacer Cup Preparation Prepare additional one bone cement for acetabular spacer cup. Appendix Hip Spacer Extraction Connect the Stem Extractor to the Reinforcement Rod and assemble the Slide Rod and Hammer to the Stem Extractor, then remove the hip spacer. When cement is in the doughy stage, finger tap the cement into acetabulum. Connect Acetabular Cup Molder to the Handle and shape the cement to form spacer cup. Acetabular Cup Molder Handle Stem Extractor Wrench UTF Stem, reduced, extractor

Order Information Catalog Number Special Order Items Dimensions Size Cement Spacer Mold S, 42 mm Cement Spacer Mold M, 45 mm Cement Spacer Mold L, 48 mm Replicase Cement Mold Case The special order items are only sold in certain area, please contact with local distributer for further information. Acetabular Cup Molder Handle Distal Diameter Distal Diameter Acetabular Size Stem Length Stem Length Head Neck Angle Head Diameter Head Diamete

Please note that this Surgical Technique Guide has been authored in the English language. Any translations into other languages have not been reviewed or approved by United Orthopedic Corporation and their accuracy cannot be confirmed. Any translated guide should be reviewed carefully prior to use and questions regarding a Surgical Technique Guide should be directed to United Orthopedic Corporation at unitedorthopedic.com/contact The CE mark is valid only if it is also printed on the product label. © 2021 United Orthopedic Corporation.