1. Catalogs
  2. V-Care Medical Systems
  3. INTENSE PULSED LIGHT (IPL)

INTENSE PULSED LIGHT (IPL)

INTENSE PULSED LIGHT (IPL)

Product catalog summary
Introduction
Intense Pulsed Light (IPL) therapy is favored for treating various aesthetic conditions due to its effectiveness and minimal side effects. IPL devices use xenon-filled flash lamps as the primary light source, powered by a capacitor bank. These lamps require cooling, typically achieved through a water-cooling system, to maintain consistent temperature and light emission.

Light Theory
Lasers and IPL differ significantly in their light properties. Lasers are coherent, collimated, and monochromatic, allowing for high-intensity focus. In contrast, IPL is non-coherent and polychromatic, covering a broad spectrum from 420 nm to 1200 nm. Both can penetrate the skin, with penetration depth inversely related to wavelength.

Indications for IPL
IPL is indicated for hair removal, acne treatment, skin rejuvenation, and vascular lesion treatment.

Features of IPL
IPL offers excellent and quick treatment results, is safe with no side effects, and is suitable for most skin types, including dark skin. It allows fast treatment of large areas and is based on xenon flash lamp technology with a water-cooling system. The device includes an ergonomically designed handpiece with four optical filters for various treatments.

Technical Data
  • Type of lamp: Xenon Flash Lamp
  • Wavelength: 420-1200nm
  • Lamp wattage: 500 W
  • Maximum light energy: 35J/cm2
  • Treatment spot size: 10 x 40mm
  • Lamp lifetime: Approximately 30,000 pulses
  • Controller: Microprocessor-based touch screen
  • Filters: 4 (HR: 650-1200nm, SR: 540-1200nm, VR: 510-1200nm, AR: 450-1200nm)
  • Unit size: Depth 680 mm, Width 400 mm, Height 350 mm, Weight 23 kg
  • Operating voltage: 220 to 230 V AC, +/- 10%, 50 Hz
See more

Catalog excerpts

INTENSE PULSED LIGHT (IPL)-1

INTENSE PULSE LIGHT (IPL) 'Light' theory as applied to lasers and IPL. Hair removal Acne Skin rejuvenation Vascular lesion The term 'laser' is the acronym of Light Amplification by Stimulated Emission of Radiation, and has three important characteristics: Excellent and quick treatment result. Safe for use with no side effect, burn, discomfort to patient. Suitable for most skin type including dark one. 1. Coherent - the photons of light are of the same phase Fast treatment on large areas 4 cm2 every 3-4 second. Based on Xenon flash lamp technology with water-cooling system. 2. Collimated - the photons of light travelparallel to each other Ergonomically designed hand piece with four optical filters to treat Hair Removal, Skin Rejuvenation, Vessel Removal (Vascular lesions) & Acne treatment. 3. Monochromatic - the light emitted from the source is of a single wavelength Technical data: These properties enable the laser beam to be focused to a very high intensity. Type of the lamp: Xenon Flash Lamp Wave length: 420-1200nm Lamp wattage: 500 W Maximum light energy: 35J/cm2. The properties of light emitted by IPL flash lamps have completely different characteristics from lasers. The major differences are that Intense Pulsed Light is non-coherent and encompasses a broad spectrum (polychromatic)- the light from an IPL flash lamp covers the spectrum from about 420 nm to about 1200 nm unlike lasers with a single wavelength. However, both lasers and IPL have common properties in their ability to penetrate skin. The depth of penetration is inversely related to wavelength; the longer the wavelength, the deeper the penetration, and vice versa. This concept of depth of penetration is very important and will be Treatment spot size: 10 x 40mm Lamp lifetime: Aprox. 30,000 Pulses Controller: Micro Processor based Touch Screen Filters: 4 Nos. HR- 650 to 1200nm, SR- 540 to 1200nm VR- 510 to 1200nm AR- 450 to 1200nm Size of the unit: Depth: 680 mm Width: 400 mm Height: 350 mm Weight: 23kg. Approx.Operating voltage: 220 to 230 V AC, +/- 10%, 50 Hz

 Open the catalog to page 1

Archived catalogs

  1. STP-DS

    2  Pages

  2. V-1000

    2  Pages

  3. V-150

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.