V-500
V-500
- Electronic Controller: Microcomputerized system with large, bright displays for easy monitoring. It includes a double digital display for infant and set temperatures, feather touch keys, LED heater output indication, and manual control. Fault indications with alarms are provided for various issues such as probe failure and temperature deviations.
- Baby Probe: Made of a highly sensitive sensor with interchangeable capabilities and silicon sheathed cable for easy cleaning.
- Physical Parameters: Mattress dimensions are 700 mm in length, 430 mm in width, and 25 mm in thickness. The working level from the ground is 900 mm, with a tilt angle of +/-8 degrees. The unit weighs approximately 35 kg and includes castors with brakes.
- Environmental Specifications: Operating temperature range is 20°C to 33°C, storage temperature range is -25°C to 60°C, and humidity range is 0-100% RH.
- Skin Temperature Probe: Range of 28°C to 38°C with an accuracy of +/-0.2°C and resolution of 0.1°C.
- Electrical Specifications: Operates on 230 V ± 10%, 50 Hz with a power consumption of 750W at maximum heater output.
- Observation Light: Halogen-based with a power requirement of 230V, 50W.
- Baby Trolley (Optional): Detachable with a large baby tray, stainless steel frame, and collapsible walls. Includes Trendelenburg and Fowler systems.
- Heater: Single element CE approved ceramic heater in a parabolic reflector.
- Other Facilities: Provision for an oxygen cylinder, IV stand, and monitor tray.
Catalog excerpts
A16408 ISO 9001:2000 ISO 13485:2003 CMD CAS V-Care way every way all the TM RADIANT WARMER "V-500" WARMER UNIT WITHOUT BABY TROLLEY WARMER UNIT WITH DETACHABLE BABY TROLLEY V-Care “V-500” warmer is innovatively designed to meet thermoregulatory requirements of new born infants who suffer extremes of heat loss. The system can be used in delivery rooms and Neonatal Intensive Care Units. The micro control based servo control system detects minute variations in skin temperature and adjust the ceramic infrared heater output to maintain the infant’s temperature at a prescribed pre set level.
Open the catalog to page 1
SALIENT FEATURES : TECHNICAL SPECIFICATIONS : THE ELECTRONIC CONTROLLER : PHYSICAL PARAMETERS : Mattress The controller is based on Microcomputerized system. Large bright displays are easy to monitor and for viewing from a distance. Double digital display system provided to measure the Infant temperature and to set the required temperature. Feather touch keys provided for easy operation. LED system provided to indicate the heater output. Manual control system provided. Fault Indications with alarm for. (a) (b) (c) (d) (e) Baby probe failure. 1°C temperature high. 1°C temperature low. High temperature...
Open the catalog to page 2All V-Care Medical Systems catalogs and technical brochures
UVC Ultra Clean1 Page
BactoDiff-OT2 Pages
UV Air Disinfection1 Page
Bioptron Light Therapy1 Page
Baby Incubatorv, V-1502 Pages
Resuscitation Unit - V-10002 Pages
Hi-Power LED Phototherapy2 Pages
Open Care System2 Pages
Multipurpose Localised1 Page
UV Comb1 Page
Ultra Pulse CO2 Laser1 Page
Only Cosmo Chair1 Page
Radio Derm1 Page
Lipo Derm1 Page
Skin & Hair Analyser1 Page
Fractional CO2 Laser1 Page
- Aesthetic medicine laser
- Skin and body treatment unit
- Trolley-mounted laser
- Dermatology laser
- Phototherapy lamp
- Medical lamp
- Surgical laser
- Visible light phototherapy lamp
- CO2 laser
- Acne treatment laser
- IPL system
- Blue light phototherapy lamp
- Treatment chair
- Hair removal IPL system
- Dermatologic phototherapy lamp
- Trolley-mounted phototherapy lamp
- Infant phototherapy lamp
- Electric treatment chair
- Germicidal lamp
- 3-section treatment chair