Technical Data Sheet va-Q-pro Product Description va-Q-pro is an advancement of the va-Q-plus vacuum insulation panel and therefore our most developed VIP based on a fumed silica powder. Our va-Q-pro, which is produced in a fully automatized production process, can be produced in various shapes and forms without any additional processes. Next to the standardized flat panels, va-Q-pro can be produced in three-dimensional shapes, in foldable boxes, in shapes with cut-outs and in even more versions. Due to its high flexibility of shapes, va-Q-pro can be used in various application fields, e.g. for insulation of electric batteries, in thermal boxes and containers, for airplane wall insulation, in refrigerators and water boilers. Best insulation value over the entire lifetime for insulation panels based on fumed silica Huge flexibility in shape and appearance (3D-panel, cut-outs, foldable shapes, etc.) due to our specifically engineered production process Temperature resistant up to 100°C, temporary up to 130 °C Long lifetime because of optimized panel designs 100 % quality control with the patented gas pressure measurement system (va-Q-check) Sustainable product (recyclable core material)

Properties Thermal conductivity - initial value @ 10 °C* ≤ 0.0035 W/(m∙K) (at delivery) according to DIN EN 12667 Thermal conductivity, ventilated @ 10 °C* U-Value - initial value @ 10°C* Area density Temperature resistance Thermal shock resistance Moisture resistance Specific heat capacity 0.8 kJ/(kg∙K) (at room temperature) Compressive strength at 10 % compression Depending on usage, up to 60 years *Please note terms of service § 6 “Deviation range of the insulation value” in “Special Terms and Conditions of Sale and Delivery, Product: Vacuum Insulation Panels (VIPs)” corresponding to the valid...

Measures and tolerances width w in [mm] length l thickness t in in [mm] [mm] Remark: Based on the unique production method, the panels are less thick at the edges and corners than in the center. The measures, tolerances and insulation values refer to the insulated area of the panel form one corner to another. Circulating the panel there is a 10 mm to 30 mm wide sealing seam. A typical panel measures 5 mm up to 20 mm. The smaller the panel the slighter is the maximal thickness of the panel due to production limits. Please ask for your wished dimensions. Flaps Width of flaps Remark: The laying...

Legal Notes/Disclaimer The data presented in this technical data sheet are in accordance with the present state of our knowledge. All numbers and features proposed in this data sheet (e.g. lifetime) were determined under test conditions in the laboratory and therefore represent a nonbinding and purely scientific value. There are no guarantees associated with. Only the respectively agreed warranty period and warranty rights apply. To the extent permitted by law, all other warranties of any kind, whether express or implied, including, but not limited to the implied warranties of MERCHANTABILITY,...