SANETIQ Mini Hand sanitizer temperature detection digital signage MANUAL GUIDE

Copyright 2021 Vacu Activ

Product overview Product specification System parameters Installation instructions Switch settings Split screen setting Maintenance instructions Troubleshooting of common problems Copyright 2021 Vacu Activ

1. Product overview Features • Internet Control: All setting and contents upgrade can be done by any internet-connected PC from anywhere; • Content Management: The content management system(CMS) allows you to log in from PC to update, schedule and manage all the dispensers on your work. • Assign / Group LCD: Assign a device to different User, Group them according to demand, assign different contents for Different Group; easily display any combination of public announcements, advertisements, videos, slide shows, and media. • Auto Power on / Power off Setup the auto power on/off time from the server...

Copyright 2021 Vacu Activ

LCD Screen Specification Product Name Hand Sanitizer temperature detection digital signage Display area Display Color Viewing Angle Flash memory Copyright 2021 Vacu Activ

Card extensions Up to 128GB tf card extensions are supported Camera Parameters Progressive scan Scanning Frequency(H)（(Sweep frequency)） Scanning Frequency(V) Effective Pixels（Effective pixels Pixel size (Pixel size) Image sensor Data output（(Data output type) Video output（(output format) Resolution and frame rate

SNR max（(Signal to noise ratio) Dynamic range（(dynamic range) Digital interface（(Connection interface) Transfer rates（(Interface speed) Focusing distance Video output（(output format) Temperature Sensing Parameters Brand Resolution Non-contact image detection of body temperature distance 30-50CM/80—100CM （(Software algorithm compensation: 50-120cm) Detection temperature resolution Detection accuracy Target temperature detection range

Non living body target temperature detection range Temperature data output rate Input voltage Maximum input current Machine power Working temperature Working humidity Storage temperature Copyright 2021 Vacu Activ

Note Device is used indoors, the temperature sensor can not be directly exposed to sunlight, and the enclosure is not waterproof, so as to avoid rainwater falling on the enclosure directly. • Wall mounting：Fix it to the wall with screws, then hang the machine, and then hang the machine. The installation is completed. • Accessories include AC external power cord. 1. Floor stand installation: the machine is equipped with a floor stand, and fix the machine on the floor support, and then completed. 2. Accessories include, base, connecting bracket, AC position power cord Copyright 2021 Vacu Activ

Function description The advertising machine integrates the functions of advertisement playing, hand washing and temperature measurement, attendance and so on The Functions are mainly below: • Advertisements can be published through USB flash disk or LAN and cloud platform • U disk release programs, there are templates, then set the content of the split screen • The device integrates face recognition algorithm, which can recognize personal information according to local face database. • Integrated infrared induction hand washing module, sensing distance 2-7mm. • Integrated human body temperature...

5. Instructions for use • Turn on and off (as shown in the figure) The button is located on the back of the device. • Network connection in the “setting” • Adding liquid (as shown in the figure) Turn off Liquid filling (automatic stop after full liquid, need to turn off the swtich) Copyright 2021 Vacu Activ Clear the liquid (after the liquid is removed, the switch need to be turned off, the liquid cannot be removed under the full liquid state, and the liquid can be removed under the normal state)

• Liquid shortage prompt (as shown in the figure) • Normal status prompt (as shown in the figure) • Full liquid prompt (as shown in the figure) Copyright 2021 Vacu Activ

5. Instructions for use • Advertising production and broadcasting • Open the terminal to play. After the software is started, the software will run automatically If it doesn’t start automatically, please go back to the device desktop, find the shortcut of “epidemic prevention and temperature measurement”, and manually click to open it. After opening, the program will be displayed as shown in the figure below; Copyright 2021 Vacu Activ

6. Switch settings • After opening the epidemic prevention and temperature measurement software, access the mouse, double-click the right mouse button, and the following figure will appear Copyright 2021 Vacu Activ

• Click “set”, input company ID, set equipment name, operation mode, whether mask template and temperature measurement, set alarm temperature, whether stranger detection and reporting, set the settings, click save, return to the blue screen interface Copyright 2021 Vacu Activ

7. Split screen settings First, determine the split screen mode of the screen (the document is attached with the style map of split screen mode at the end of the document). For example, the published content is 2-3 split screen mode (two thirds on the left and one third on the right) 2-3 split screen mode On the computer, connect to the USB flash disk, and create new names of “2-3-1” and “2-32” in accordance with the style map, where “- face” is added to the position of human face test, such as “2-3-1-face”

Then drag the pictures or video materials to be played in each area into the corresponding folder. For example, if the “glory 1920-1080. MP4” video is played in the 2-3-1-face area, the “glory 1920-1080. MP4” is dragged into the 2-3-1-face folder, and the other areas are also operated in the same way; USB flash disk update content After the display terminal turns on the software and enters the face attendance standby mode, insert the U disk just edited to prompt copying. After the copy is completed, pull out the U disk and play. Full screen Copyright 2021 Vacu Activ