ATEX Vacuum Pumps and Gauges
12Pages

ATEX VACUUM PUMPS AND GAUGES CHEMICALLY RESISTANT, OIL-FREE AND SAFE

ATEX chemistry diaphragm pumps. ATEX VARIO® chemistry diaphragm pumps. Chemistry diaphragm pumps, vacuum systems and gauges for use in areas with potentially explosive atmospheres When intended for use in areas with potentially explosive atmospheres, European Community Directive 94/9/EC (ATEX) requires equipment in conformity with ATEX standards. VACUUBRAND offers Category 2 chemistry diaphragm pumps and vacuum systems in conformity with ATEX (for use in zones where an explosive atmosphere is likely to occur). These chemistry diaphragm pumps are appropriate for such locations because they...

2.3 ATEX vacuum pumps // www.vacuubrand.com/atex

Pumping speed diagram at 50 Hz, without gas ballast NOW AVAILABLE WITH VARIO®-CONTROL A characteristic feature of all models is their high performance even close to specified ultimate vacuum. The pumps are also characterized by excellent long-term stability of performance.

O outstanding chemical resistance and tolerance to condensate by use of fluoro plastics Q flame-proof motor with built-in and self-retaining overcurrent and excess temperature protection, the customer does not need any additional overcurrent protection system Q overpressure safety relief valve at the outlet Q safety diaphragm design with inert gas purge feature to permit optional installation of a diaphragm crack-detection system Q separator AK and emission condenser EK for pump protection and solvent recovery Technical data ATEX conformity Pumping chamber (pumped gases): II 2G IIC T3X...

O outstanding chemical resistance and tolerance to condensate by use of fluoro plastics flame-proof motor with built-in and self-retaining overcurrent and excess temperature protection, the customer does not need any additional overcurrent protection system overpressure safety relief valve internal and at the outlet safety diaphragm design with inert gas purge feature to permit optional installation of a diaphragm crack-detection system separator AK and emission condenser EK for pump protection and solvent recovery Technical data ATEX conformity Pumping chamber (pumped gases): II 2G IIC...

MV 10C EX MV 10C EX +AK +EK O outstanding chemical resistance and tolerance to condensate by use of fluoro plastics Q flame-proof motor with built-in and self-retaining overcurrent and excess temperature protection, the customer does not need any additional overcurrent protection system Q overpressure safety relief valve internal and at the outlet Q safety diaphragm design with inert gas purge feature to permit optional installation of a diaphragm crack-detection system Q separator AK and emission condenser EK for pump protection and solvent recovery Technical data ATEX conformity Pumping...

O full advantage of ATEX chemistry diaphragm pumps O short process times due to hysteresis-free VARIO® vacuum control VARIO®-pump operates on demand only as fast as necessary - minimal power consumption, extended maintenance intervals, silent operation vacuum controller CVC 3000 (optional) for precise vacuum control and fully automatic processes complete system accessories I/O-Module, supply / isolation amplifier and ATEX vacuum sensor Technical data ATEX conformity Pumping chamber (pumped gases): II 2G IIC T3X Environment with inert purge gas: II 2G IIB T4 X Environment without inert...

O full advantage of ATEX chemistry diaphragm pumps O short process times due to hysteresis-free VARIO® vacuum control O VA^O®-pump operates on demand only as fast as necessary - minimal power consumption, extended maintenance intervals, silent operation O vacuum controller CVC 3000 (optional) for precise vacuum control and fully automatic processes O complete system accessories I/O-Module, supply / isolation amplifier and ATEX vacuum sensor Technical data ATEX conformity Pumping chamber (pumped gases): II 2G IIC T3X Environment with inert purge gas: II 2G IIB T4 X Environment without...

^ cvc 3000 Installation outside of the EX-area, without integrated sensor Control range (dependent on the sensor) 1080 - 0.1 mbar / 810 - 0.1 torr Interface external RS 232C Interface to pump / sensor Analog-I/O-Module, connectable via isolation amplifier ordering data i) CVC 3000, 100-230 V ~50-60 Hz Supply / isolation amplifier 4 ATEX-sensor

O large analog and digital vacuum display O mains independent power supply unit BVE 9V, with ATEX approval, mercury and cadmium free O enhanced battery life due to automatic shutdown and variable sampling rate O high reliability, low EMI emission level near detection limit, high degree of immunity to electromagnetic interference for use in industrial environments O capacitive alumina ceramic diaphragm vacuum sensor with excellent chemical resistance, accuracy and long term stability Vacuum Gauge ATEX category 2 approval Technical data ATEX-approval II 2G Ex ia IIC T4 Upper measuring...

Phone Fax Sales Service 995541 PRINTED IN GERMANY EN / 06 / 2015 © VACUUBRAND GMBH + CO KG