Specifications:
The document provides technical data for the ProLink LP Balloon Expandable Coronary Stent and Stent System. The balloons are available in sizes ranging from 2.50 mm to 4.00 mm, with corresponding pressure ratings from 0.2 Mpa (2 bar) to 1.9 Mpa (19 bar). The nominal pressure is specified at 6 BAR (0.6 Mpa), and the rated burst pressure is 18 atm.

Materials and Design:
The stents are made from medical-grade 316L stainless steel, featuring a very smooth electropolished surface. They are designed with thin strut technology, offering high longitudinal flexibility and excellent side branch access. The low strut thickness and width (0.0095mm/0.0037") contribute to a very low crimped profile, enhancing the stent's ability to conform to the vessel wall without plaque prolapse.

Performance and Compatibility:
The stent system is compatible with a 6F guide catheter and can cross 99% of occluded vessels. The stent length and balloon length are matched to prevent distal or proximal balloon overhang, ensuring precise placement.

Quality Assurance:
Each stent undergoes quality control to ensure no surface defects and high retention force between the balloon and stent. The document highlights the use of FEM analysis to demonstrate the stress/strain zones of the thin strut technology, ensuring even expansion and no flaring of the stent ends.

Clinical Outcomes:
The document includes a case study showing the effectiveness of direct stenting with the ProLink Combo in treating a tortuous lesion, resulting in well-healed stents with a thin neointima.