Technical Datasheet Vena® SIL 630 Applications It is especially recommended for the transport of liquid or semi-liquid fluids in the food, cosmetic, chemical and pharmaceutical industries. It offers an extremely broad field of applications. It is recommended especially when the inner liquid has to be seen to control the flow. Limitations Respect the bending radius and work pressure established values. Mind the chemical compatibility of the fluid with the silicone. This product is not recommended for the transport of abrasive particles Odorless, tasteless and completely non-toxic. Translucent and smooth inner and outer appearance. High level of transparency. Can be equipped with 316L stainless steel fittings on each end with a roughness value of less than 0.8 m (or 0.5 m on request). Operational temperature range from -60ºC (-75ºF) to +200ºC (392ºF), it may reach up to +220ºC (428ºF) during short periods of time. Regulations Platinum cured silicone produced in compliance with:  German BfR Standard part XV USP Class VI <88> in vivo tests, 121ºC This reference is manufactured with VMQ (Vinyl-Methyl quality) silicone and stainless steel wire spring encased inside the hose. Silicone rubber used is in accordance with EU Directive 2002/95/ECC for Restriction of the use of hazardous substances (RoHS) Contact your sales office for more information info@

Technical Datasheet Vena® SIL 630 Technical Specifications Inner Diameter Wall thickness The working pressure of this hose is computed so that at working conditions the enlargement of the hose is about a 20% of the original length. Contact your sales office for more information [email protected] – www.venai