Specifications:
The document describes silicone tubing used in bioprocessing, highlighting its animal-free composition, clean room manufacturing in ISO14644-1 Class 7, and laser etching for traceability. The tubing is available in 25ft and 50ft lengths and is radiostable, suitable for gamma/eBeam sterilization. It features smoothness to reduce protein binding and biofilm formation and is double bagged under vacuum.

Material and Performance:
The tubing is made from platinum-cured silicone, postcured to eliminate volatiles, and reinforced with polyester or fiberglass braiding. It has a hardness of Shore A 60, tensile strength greater than 7 N/mm², elongation over 300%, tear strength over 20 kN/m, and density of 1.17 g/cm³. The double braided version offers moderate pressure resistance and withstands temperatures from -60˚C to +180˚C.

Compliance and Standards:
The product complies with various standards including ADCF, P/BPA, BSE/TSE, EU 10/2011, EU 1935/2004, BfR XV, 3A 18-03, EP 3.1.9., FDA 21CFR177.2600, USP 85, 87, 88, 381, 788, and ISO 10993 series. It is biocompatible and suitable for sterilization methods like dry heat, autoclave, CIP, SIP, ethylene oxide, hydrogen peroxide, eBeam, and gamma.

Warranty and Liability:
VENAIR offers a limited warranty for 6 months from the sale date, covering defects in materials and workmanship. The company disclaims other warranties and assumes no liability for advice or results obtained from product use.

Product Variants:
The document lists various silicone and thermoplastic tubing options, including Flow Pumpgrade, Flow Multipurpose, Flow High Pressure, Precision, Braided, Braided Plus, Braided High Pressure, Weld, Pump, Fluorinated, FEP, and PTFE.

Technical Data:
A table provides detailed dimensions and pressure ratings for different tubing sizes, indicating inner diameter (ID), outer diameter (OD), wall thickness, working pressure, and burst pressure at 20ºC.