Venaflon® FULL - X
3Pages

Technical Datasheet Venaflon® FULL - X Applications Venaflon FULL-X is a highly flexible universal hose and its main characteristic is that it is conductive and, therefore, suitable for working areas requiring utmost safety. It is specially recommended for the transport of liquid or semi-liquid fluids in the food, cosmetic, chemical and pharmaceutical industries, specially, when the chemical products are highly flammable. This hose is able to transport liquid or semi-liquid food-stuffs by impulsion or suction, since its design can resist either pressure or vacuum. The perfluorinated inner liner ensures utmost chemical and temperature resistance, an excellent impermeability and absolutely hygienic and contamination-free delivery of fluid. Limitations Respect the bending radius and work pressure established values. Mind the chemical compatibility of the fluid with the inner PFA. Not autoclavable. Regulations The inner layer of PFA is in compliance of: − US FDA Standard 21 CFR 177.1550 Properties - Odorless, tasteless and completely non-toxic. - High flexibility - The hose presents a resistivity lower than 109. - Black and smooth appearance of the inner layer of PFA and black and smooth outer rubber layer. - Can be equipped with 316L stainless steel fittings on each end with a roughness value of less than 0,8 m (or 0,5 m on request). - Operational temperature range from -20°C to +65°C in accordance with EN 12115:2011. - Steam disinfection with peaks up to +164ºC for maximum 20 min. - The hose is manufactured in a maximum length of 20m (65.62 ft). - The vacuum resistance is 0.9 bar (13.05 psi). USP Class VI <88> in vivo tests USP Class VI <87> in vitro tests - Construction: PFA, fully fluorinated, mirror-smooth, black colour, antistatic (106) - Reinforcement: high strength plies of synthetic cord, embedded steel helix wire and built-in copper wires - Outer layer: synthetic black rubber, resistant to abrasion, weather, oils and fats. It is completely smooth. Technical Specifications Contact your sales office for more information info@venair.com

Technical Datasheet Venaflon® FULL - X Inner Diameter Wall Thickness Technical information for explosive atmospheres Electrical properties Reference standards ISO 8031:2009 / EN12115 (if is complete with end fittings) R<100Ω Electrical features information Classification of hose grades Continuous electrically bonded ISO 8031:2009 & IEC/TS 6007932-1:2013 Conductive inner lining (incorporating conductive only on inner lining , R<1MΩ) Zone 0-20 (Class I & II D1) Zone 1-21 (Class I & II D1) Zone 2-22 (Class & II D2) Explosive Atmosphere inside the hose Explosive Atmosphere outside the hose ATEX...

Technical Datasheet Venaflon® FULL - X Obligations - This reference is outside the scope of the ATEX Directive 94/9/EC due to the fact it's a product having not their own source of ignition. - End-to-end electrical bonding to assure continuity is necessary; metal helix of the hose must be connected electrically to both end fittings. - Properly connect of the hose to earth (is necessary earth the hose metal fittings or directly the wire of both ends of the hose). - This hose cannot be used for transport of explosive materials. Use precautions - This hose cannot be used with pneumatic...