Vertys Apolix XL
1 / 12Pages

For Full Denture Lovers there’s a new really special Professional!

Eruption of Strokkur geyser in Iceland

Apolix XL is the new extra large, fully automatic polymeriser, that can manage both cold and heat polymerization. As for Apolix, it can also be used just for pressure. Very useful for stabilizing the silicones of the Vertysystem line.

IF YOU’RE A FULL DENTURE LOVER, YOU HAVE FOUND A TRULY FRIEND! Apolix XL can contain up to 6 flasks simultaneously, which means that you can cure up to 3 complete mouths in the same time.

6 FLASKS AT THE SAME TIME?

The Apolix XL interface is controlled by a display and the user experience is simple and intuitive. You can cook up to 3 total mouthin just one polymerization! The interface of Apolix XL have been designed to ensure speed and practicality during your job. Internal volume so large that it can accommodate up to 6 Furbo Alu Big mittens at the same time and 4 Alu Extreme mittens! All Apolix XL programs have the automatic air / water drain function. This means that you will only have to worry about removing the flask from the chamber.

APOLIX XL PROGRAMMES Apolix XL has 4 programmes Vertysystem already set: Vertys Prothesis Excel program, Vertys Prothesis Hot program, Vertys Templus program and Vertys Surgical program. P.0 Full Denture by Cold EXCEL Ideal programme for cold curing resin for full denture resin, charged with composite micro-pearls. For a very high quality polymerization set the pressure to 2 Bar and fill the chamber with at least 3/4 of water. P.1 Full denture by Heat HOT Ideal programme for heat curing full denture resins, charged with composite micro-pearls. For a very high quality polymerization set the...

Other 6 programmes are totally free and custom from the user based on his preferences. Changing the parameters of the machine is very easy but to explain that there is the instruction for use given with the machine. 40 min. Polymerization Temperature: 45°C Total polymerization time: 40min 60 min. Polymerization Temperature: 85°C Total polymerization time: 60min 30 min. Polymerization Temperature: 45°C Total polymerization time: 30min 40 min. Polymerization Temperature: 38°C Total polymerization time: 40min Polymerization time Cooling down + automatic air/water drain

TECHNICAL DATA Power Supply Power consumption Above tension Category Max pressure Working temperature limits Working temperature zone Time limits Working Temperature Environmental pollution level Weight External Dimensions Internal Dimensions

Via Retrone 14, Altavilla Vicentina 36077 (Vicenza) - Italy T +39 0444 960 991 | W vertysystem.com M info@vertysystem.com | ordini@vertysystem.com