VIGIPROD® NO-CONTACT MEASURING SYSTEM Absolute accuracy (-/+ 0,5μm) User-friendly (color touch screen) Up to 20 pieces/second inspection speed System suited to the production environment

No-contact measuring system VIGIPROD® is a non-contact dimensional control system specifically designed for use in harsh environment. It consists of one controller and one or several measuring optical sensors. Measurements are performed by infrared optical sensors (shadowgraphy method). A transmitter delivers a beam of light which is partially obscured by the part being controlled while a receiver measures the beam obscuring ratio/ The control unit automatically calculates the position of the part in the optical field. Control unit Transmitter: E100, E200 Receiver: Type R and S Examples of controlled...

Accuracy - High output - Repeatability VIGIPROD® can be programmed to instantly control static or moving components, as well as continuously measure static or moving components. It can also perform specific measurements. TYPE OF MEASURES: Outer/Inner diameter Height/Height difference RECEIVER REFERENCES Accessories for specific applications are available upon request. A devoted customer service team is at your disposal for any consultancy and installation at your facility. VIGITECHNICS - ZI les landes 49 240 Avrillé France - Tel : +33 (0)2 41 34 35 11 - Email : [email protected]

Applications VIGIPROD 2 is the successor of VIGIPROD 1 that had worked to the full satisfaction of the industry all over the world. The control unit of the VIGIPROD 2 is compatible with the sensors of the VIGIPROD 1. Our team will assist to install VIGIPROD. Diameter & Length Boom control Ovalisation, warp & eccentricity Measure of chamfers on moving parts Fitting orientation for seals Gauge diameter Thread control Screws control Tapping detection Indirect control of height on moving parts Strip width Origin Integrated within QC-Developpement group, VIGITECHNICS, QUASAR CONCEPT and INCATRONIC...