Web-Coater (TDP/ODF) Model No. VJTDP-Pilot Scale TECHNICAL SPECIFICATIONS Video Link Add: VJ Instruments, 166/1, Deoda Sadan, Main Road, Karanja (Lad) – 444105 Dist: Washim. (MS). Office: +91 7256-224200 M- 91 9423128314 | Email: [email protected], [email protected]

www.vjinstruments.com General The VJ Instruments table top Film Former coating machine is intended for development and small production of transdermal therapeutic delivery system laminates (TDS-patches) as well as to create edible films/ oral dissolvable film bulk were (EDF/ODF) without any further modification. It permits continuous coating of 150 mm wide webs with successive lamination as specified in Technical Specification Table general data. The machine contain a coating head, where the coating knife is installed. This special tools guarantees an extreme high product quality with an ultimate...

Drying Technique The dryer consists of one consecutive stainless steel heating plate inside an enclosed cabin. The Plate is arranged linearly within the cabin and the coated film slides across this plate horizontally. The temperature of the plate is closed loop controlled by a PT-100 element fixed at the bottom side of the plate. The Temperature range is from ambient room temperature upto 80oC individually adjustable by a digital controller. A digital Display on the Machine shows the current temperature of the plate. The dwell period for the coated foil in the dryer is determined by the web speed....

Electric Consumption Coating system The coating System is built up of an precise coating knife for coating width upto the maximum 150 mm and can easily reduced by Teflon strips to any width. The useable coating width is 120 mm for the maximum coating width of 150 mm with the below mention accuracy. The coating knife is fed solution by precision tooth gear pump or peristaltic pump. Coating accuracy +/- 1 to 5 µm for a 100 µm dry coating over the entire coating width All winders (unwinder for carrier foil, unwinder for backing foil and rewinder for laminates) are with shafts for 3”. 200 kg. (Approximately)...