MATERIALS FOR DENTAL-TECHNICAL LABORATORY
48Pages

DEAR COLLEAGUES! Even in ancient times, people realized the necessity to replace lost teeth. Manufacturing of dental prostheses was first attempted before the Common Era Modern orthopaedic dentistry includes diagnosis, prosthetics and prevention of dental diseases by delivering various dental prostheses. Objectives of orthopaedic dentistry: • restoring integrity of dental crowns, dental rows, treatment of various maxillofacial defects; • correcting abnormalities and deformations of teeth and dental rows for functional and aesthetic rehabilitation of the dental system. These tasks are solved...

base resins w "■l ii'um ?yOnbix njxiTcjcu VVV Be^aKpfifl -M XO caHoreepaeioman n/iaciwacca ,,a 0t,,0Be MerMflMeTaKpn/i«iT3 rnwiynpospaHHan poaoean C npO)KM/lKaMM BELACRYLPolymer material for denture bases Produced in the following versions BELACRYL- M (methyl methacrylate) - precursor resin; BELACRYL- E (ethyl methacrylate) - non-precursor resin. PURPOSE HC is a heat-curing base material intended to produce bases for removable dentures - full and partial. SC is a self-curing base material intended for repairs and rebasing of removable dentures, as well as to produce and repair orthodontic...

BELACRYL - orthoPolymer material for orthodontic appliancesPURPOSE Making and repairs of orthodontic appliances and structures FEATURES The material is manufactured in the form of two components - a powder containing methacrylic acid polyesters and a polymerization reaction catalyst - benzoyl peroxide and a liquid containing monomer methyl methacrylate which, when mixed, form a polymer. If necessary, the polymer may be coloured blue, red and/or yellow by using dye concentrates. PACKAGE code PURPOSE Making of orthodontic appliances, dental prostheses, repairs and rebasing of removable...

base resins PURPOSE Tinting of acrylic veneers on metal structures of fixed prostheses, tinting of base resins, toning and tinting of acrylic crowns, imitation of cosmetic defects of dental enamel. FEATURES «Belacryl» - color dye is manufactured in the form of two components - 1) powder containing methacrylic acid polyesters, fillers and pigments, and 2) liquid containing triethylene glycol dimethacrylate. To obtain a finished product, mix the dye components, then apply the mixture on the pretreated metal surface, then heat it. The dye hardened on the metal surface prevents it from...

NOLATEK Light-cured base material PURPOSE • making of full and partial removable denture bases; • production and repairs of orthodontic appliances and structures (dental flippers, prosthetic bridges, dental bite splints, chin slings and custom impression trays) • rebasing and repairs (including express repairs) of removable denture bases. The «Nolatek» base material is produced on the basis of copolymers of polyethers of methacrylic and dimethacrylic acids, composite modified, and it pertains to light-cured resins. The material has the form of homogeneous plastic polymer mass of various...

STICKY BehOBaKc' Belowax PURPOSE Modeling of removable denture bases, production of occlusal templates, formation of customimpression trays, base trays and their parts. FEATURES The basic wax is manufactured in two forms: • soft; • hard. Semitransparent wax plates without internal tensions in softened state are easily attached to each other without sticking to fingers. The wax is easily shaped when heated, and sharp instruments are used to handle it at a room temperature. When slightly heated above the flame, the surface of the wax plates becomes smooth. When a denture is produced, the wax...

PURPOSE Making of wax caps with uniform wall thickness by using the dipping method. FEATURES The dipping wax «Belowax»K is a wax composition which enables obtaining an elastic wax cap having a wall thickness of 0.35 mm with the dipping duration of 1 second. The wax dipping temperature is 850C. The best results are obtained with quick dipping of a dental die into melted wax followed by its slow removal from the basin. In 30 seconds, the wax cap becomes sufficiently solid, it is deformation-free, which guarantees high precision of casting. materials for dental-technical laboratory 7

PACKAGE PURPOSE Making of inlays, crowns, inserts, cast clamps, portion crowns, arches and frames for bugel dentures and prosthetic bridges by using the method of moulding by cast models. FEATURES The main components are paraffin, ceresin, natural and synthetic resins, modifiers and dyes. The wax has good plastic properties (fluidity under load within the temperature range of 37-45°C), it has a low degree of thermal shrinkage, it is easily modeled with dental tools, it does not change its properties when melted repeatedly. The ash content of the modelable wax does not exceed 0.02% when...

I COMPELAK Compensation varnish PURPOSE • partial compensation of shrinkage in production of whole-piece dental prostheses; • creation of an intermediate layer on the plaster model of the stump in order to form a distance gap under the fixing cement. FEATURES «Compelak» varnish is viscous liquid coloured gold, silver, blue or red. When dried, the varnish provides non-shrinkable inelastic film which firmly clings to the plaster model. The duration of film formation is no more than 2 minutes. Film thickness of one «Compelak» varnish layer: • gold 7-10 pm; materials for dental-technical...

g and polishing of items BELECT Powder for grinding and polishing of dental items and metals PURPOSE Removal of investment material, preparation of frames before baking, removal of porcelain residues, as well as for treatment of surfaces of cobalt-chromium alloys. FEATURES «Belect» is white powder based on electrocorundum with a high content of aluminium oxide (99.5%). The material is inferior in hardness only to diamond. It is the most harmless fragmenal material in the electrocorundum group . The Belect powder is manufactured in fractions: Grain size Powder granularity granularity No.6...