MADE IN GERMANY FOR OVER 100 YEARS. DEDICATED TO DIGNIFIED CARE. 2 pieces, for Vis-a-Vis beds Finess With its stabilizing, firm-elastic middle promote air circulation — reducing the layer and soft-elastic lying surface, the build-up of moisture and preventing skin "Finess" mattress provides the best possible sink-in and stabilizing behaviour. The dimensionally stable specialty foam The reinforced seating zone where the supports its long-term effect. The special patient enters or leaves the bed increases wave cut provides particularly effective safety and makes it easier to get in or out ventilation, and the additional air channels → Highly elastic HR cold-foam mattress in a triple-layer design → Thanks to its symmetrical design, the mattress can be turned four ways → Foams: certified according to Oeko-Tex Standard 100, Product Class 1 Colour: grey Textile carrier: 100% polyester, moisture-resistant layer: 100% polyurethane Two handles for turning Bi-elastic Resistant to bacteria, mites and viruses Hypoallergenic Anti-bacterial coating: Lanxess Preventol MP100 Impenetrable to water and urine Flame retardant to UNI 9175: Class 1M + BS 7175 crib5 Resistant to blood, urine, oils, fats Resistant to disinfectants in accordance with VAH & RKI Washable up to 95°C Autoclavable up to 105°C Mass per unit area: 190 g/m² ±10 → Water column in accordance with UNI EN 20811 > 200 cm → Water vapour permeability in accordance with DIN 53122 > 500 g/m²/24 h → Continuous zip on one long side and both short sides → Cover removable Völker reserves the right to make changes to the design, specifications and models without prior notice. Products may vary slightly from the colours shown here. Subject to printing errors. All information is non-binding. Not all products/options are available in all countries. For further information on our products or services, please contact your local Völker representative or visit our website. ©2018 Völker | All rights re

MADE IN GERMANY FOR OVER 100 YEARS. DEDICATED TO DIGNIFIED CARE. 2 pieces, for Vis-a-Vis beds Visco The core structure of the "Visco" cold- and relief — additionally supported by foam mattress consists of an optimum the pressure-distributing middle layer. combination of materials to enhance The supporting bottom layer ensures the pressure-relieving effect. The special dimensional stability and prevents bedsores. viscoelastic foam lying surface moulds gently to the patient. With its unique The reinforced seating zone where the adhesive pressure behaviour, the mattress patient enters or leaves...