Whole-Body Hyperthermia System 1. Fresh water connection Shut-off valve %“ male thread Water flow min. 4 l/min Hose length 1.5 m (standard), longer length available upon request Option: For operational reliability reasons, the use of a shut-off ball valve is highly recommended. Remark: Scope of delivery includes an AquaStop system similar to commercially available household appliances (e.g. washing machine, dishwasher). 2. Waste water connection Outlet 0 20 mm, with odor trap preferably in close proximity to fresh water connection Remark: Using the side outlet of a sink odor trap is possible. For convenience purposes, the installation of a sink is highly recommended. Rated voltage 400 V three-phase current (16 A CEE socket) Protection 3-pole circuit breaker C16, ELCB Cable length 2.5 m (standard), longer length available upon request Potential equalization Cable (4 mm2) with terminal block (or similar) IRATHERM®1000M (LxWxH) 2,500 mm x 870* mm x 850 mm * ... Support width: 1,000 mm Weight: 140 kg Remark: Minimum required floor space for IRATHERM®1000M system and patient treatment: Subject to technical changes and modifications!

Von Ardenne Institute of Applied Medical Research GmbH Whole-Body Hyperthermia System IRATHERM®1000M Floor space requirements for system installation and patient treatment Installation area Utilities (1m / 1.5m) min. 500 mm H2O inlet connect ¾“ male thread (for AquaStop) H2O outlet connect  20 mm Power connector 16 A CEE socket in consideration of operating and controlling the system as well as attendance of patients and monitoring Sink/drain Patient monitoring (with IRAsoft) Operations area for medical staff min. 3,500 mm Subject to technical changes and modifications! Zeppelinstr. 7 | 01324...