Inline valve general information product area application geometry AIRcontrol breathing protection handwheel in line with inlet connection [standard geometry] technical data gas type inlet connection outlet connection working pressure nominal diameter [valve seat] compressed air M18x1.5, E17con, M25x2 [acc. to EN144-1:2005] 25E[acc. to ISO 11363-1] others on request G5/8" RH fern. [acc. to EN144-2:2005] others on request 200 I 300 I 335 bar 4.5 mm materials metals valve body: brass polymers handwheel: TPU, flame resistant o-rings: EPDM optional accessories for the outlet connection forthe inlet connection others closing plug 200 / 300 bar • protection tube • sinterfilter • EFV - Excess Flow Valve bursting device [for 200 / 300 bar cylinder working pressure] operating conditions working temperature: -20 0C to +65 0C [may vary by attachment part] maintenance / service life inspect at regular intervals [e.g. as part of the cylinder recertification] and service or replace depending on the inspection results operation standard: handwheel TPU, flame resistant various colour options available [standard colours: black, blue, grey] handwheels for protection against unintentional closing: • double-winged handwheel • ratchet handwheel • Push-Button certification & approval • type approval certificate BAM-TPED-2Q21/Q16 • authorisation certificate BAM-TPED-beP [2011/001] acc. with directive 2010/35/EU in conjuction with subsection 1.8.7.6 RID/ADR 2021-11-29 VTI Ventil Technik GmbH | Iserlohner LandstraEe 119 | DE-58706 Menden | Tel.:+49 2373 935 3 | Fax:+49 2373 935 444 | [email protected] | www.vti.de