MR Accessories
17Pages

OPERATORS MANUAL

Thank you for purchasing this MR Conditional product. Manufactured and tested to the highest standards it is guaranteed MR Conditional to 7.0T. Our products are manufactured by Wardray Premise Ltd at our UK based factory to BS EN ISO 13485:2016. Manufacturing address: Wardray Premise Limited, Northern Regional Office, Unit 2, Springvale Works, Elland Road, Brighouse, West Yorkshire, HD6 2RN, UK To ensure that you obtain maximum benefit from your product, please take a few minutes to read the enclosed information regarding operation, service and maintenance. If you have any problems in the...

Safety Definitions for MRI as Defined by International Standard F2503-20 MR SAFE: An item that poses no known hazards resulting from exposure to any MR environment. MR SAFE items are composed of materials that are electrically non-conductive, non-metallic, and non-magnetic. MR CONDITIONAL: An item with demonstrated safety in the MR environment within defined conditions including conditions for the static magnetic field, the time-varying gradient magnetic fields and the radiofrequency fields. Supplementary marking – additional information that, in association with marking as “MR...

MR2501 - Instrument Trolley with drawer MR2502 - Instrument Trolley without drawer MR2503 - Overcouch Instrument Trolley MR2504 - Single Step Stool MR2505 - Double Step Stool with handrail MR2506 - Double Step Stool without handrail 9 - MR2508 - Linen Stand MR2508D - Double Linen Stand Page 10 - MR2530 - Drug Administration Trolley MR2520 - Utility Trolley with drawers MR2521/3 - Utility Trolley with shelves MR2525 - Lockable Utility Trolley MRCT450 Coil Trolley MR4502 - Surgeons Stool with Arm and Back Rests MR4503 - Surgeons Stool with Back Rest MR4504 - Surgeons Stool without Arm or Back...

MR2501 / MR2502 INSTRUMENT TROLLEYS Specification The MR2501 and MR2502 are designed to be MR Conditional for use up to and including 7.0 Tesla and are manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. The MR2501 Instrument trolley comes with two shelves and a drawer (Fig.1) and the MR2502 Instrument trolley has two shelves and no drawer (Fig.2). Serial Number Maximum load: 20 Kg each shelf Maximum load: per plastic drawer 5 Kg

MR2503 OVERCOUCH INSTRUMENT TROLLEY Specification The MR2503 is designed to be MR Conditional for use up to and including 7.0 Tesla and is manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. Operating Instructions To adjust the height of the tray, unlock the adjusting screw and lift to the height required, when height attained lock the adjusting screw. Maximum height 1400mm / Minimum height 950mm Adjusting Screw Serial Number Maximum load: Do not load the tray with more than 11 Kg

MR2504 / MR2505 / MR2506 STEP STOOLS Specification The MR2504, MR2505 and MR2506 are designed to be MR Conditional for use up to and including 7.0 Tesla and are manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. The MR2504 is a single step stool (Fig 1), The MR2505 is a double step stool with left hand side handrail (Fig 2) The handrail for the MR2505 can be allocated on the right or the left hand side at the time of ordering. The MR2506 is a double step stool without handrail (Fig 3) Serial Number Underside of step Maximum load: 220...

MR3005 WASTE BINS Specification The MR3005 is designed to be MR conditional for use up to and including 7.0 Tesla and is manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. The features for this product include the following: • It has a hands free operation to assist with infection control procedures. To open the bin lid, using your foot, press the pedal in the centre of the base. The lid will close when your foot is removed from the pedal. 2 rear wheels to assist in moving the bin. Lids are available in yellow, black, orange and blue...

MR2508 LINEN STAND & MR2508D DOUBLE LINEN STAND Specification The MR2508 (Fig 1) and MR2508D (Fig 2) are designed to be MR Conditional for use up to and including 7.0 Tesla and are manufactured and tested to the highest standards. Please only use these units for the purpose intended. Serial Number

MR2530 DRUG ADMINISTRATION TROLLEY Specification The MR2530 (Fig 1) is designed to be MR Conditional for use up to and including 7.0 Tesla and is manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. The MR2530 is constructed in aluminium has four drawers and a three sided top shelf. The locking design locks all four drawers at once using one key. The cabinet is secured by ensuring the locking front panel is engaged and the key turned to lock (Fig 2). To open, turn the key and fold the securing locking panel backwards (Fig 3). It has...

Brake Lever Release Fig 5 Maximum load: per drawer 10 Kg. Maximum load: top shelf 20 Kg. 2 people are required to safely move the unit if fully laden.

MR2520 / MR2521/3 UTILITY TROLLEYS Specification The MR2520 and MR2521/3 are designed to be MR Conditional for use up to and including 7.0 Tesla and are manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. The MR2520 (Fig 1) Standard Utility trolley comes with 6 x 75mm deep drawers and a 2mm aluminium grey powder coated top as standard. The MR2520 (not shown) Special Utility Trolley comes with either of the following draw depths 150mm, 200mm and 300mm or any combination of the 3, which must be specified when the order is placed. The...

Serial Number on back face The MR2525 is designed to be MR Conditional for use up to and including 7.0 Tesla and are manufactured and tested to the highest standards. Please only use the unit for the purpose it was intended. The MR2525 Utility trolley comes with 6 x 75mm deep drawers and a 2mm aluminium grey powder coated top as standard. It has a Perspex, lockable front (2 keys supplied) and the sides and back are enclosed. It has a side rail with adjustable IV pole and an oxygen cylinder holder. Serial Number MRCT450 COIL TROLLEY Made from powder coated aluminium the coil trolley has...