MR5505 MR Conditional Adjustable Height Cube Trolley and Fixed Top Trolley
17Pages

MR5505 MR Conditional Adjustable Height Cube Trolley and Fixed Top Trolley OPERATORS MANUAL

Introduction Thank you for purchasing this MR Conditional product. Manufactured and tested to the highest standards it is guaranteed MR Conditional to 7.0T. Our products are manufactured by Wardray Premise Ltd to BS EN ISO 13485:2016 and are CE marked. Manufacturing address: Wardray Premise Limited, Northern Regional Office, Unit 2, Springvale Works, Elland Road, Brighouse, West Yorkshire, HD6 2RN, UK To ensure that you obtain maximum benefit from your product, please take a few minutes to read the enclosed information regarding operation, service and maintenance. If you have any problems...

Safety Definitions for MRI as Defined by International Standard F2503-20 MR SAFE: An item that poses no known hazards resulting from exposure to any MR environment. MR SAFE items are composed of materials that are electrically non-conductive, non-metallic, and non-magnetic. MR CONDITIONAL: An item with demonstrated safety in the MR environment within defined conditions including conditions for the static magnetic field, the time-varying gradient magnetic fields and the radiofrequency fields. Supplementary marking – additional information that, in association with marking as “MR...

Specification The MR5505 Trolley is designed to be MR Conditional and is manufactured and tested to the highest standards. The MR5505 is constructed from 3 main materials, these being aluminium, brass and 316 stainless steel. The Top Frame, Pivot Sections, X Frames and Base frame are all manufactured from aluminium, which whilst being MR Compatible is also lightweight, this aids the easy movement of the trolley. Brass and stainless steel materials are used in the manufacture of the Pivot Bolts and parts within the hydraulic pump and cylinder. It is advisable that the product is inspected...

MR5505 Cube Trolley parts reference Serial Number under backrest Backrest support Backrest Handle on pivot section View behind backrest Lobe knob for IV pole Plunger Pivot section Pivot section Pull handle Plunger IV Pole (stored) Castor Brake Lever Pedal Handle on pivot section Brake Lever Castor IV Pole stored on left hand side of trolley

MR5505 Fixed Top Trolley parts reference Serial Number under backrest Backrest support View behind backrest Lobe knob for IV pole Plunger Plunger Brake Lever Pedal IV Pole stored on left hand side of trolley

Operating Instructions Raising and Lowering Trolley There is a pedal located each side of the trolley. To raise the trolley place your foot on the black rubber (Fig.1) and push down until you feel it stop, lift foot and allow the pedal to raise until it stops, repeat until desired height is reached, or top height is achieved. To lower, place foot on black rubber and push down until you feel the stop, then push further and table top will lower. Remove foot when table reaches desired height or lowest position is achieved. Please note the trolley is fitted with a safety ‘blow-off ‘system, this...

Operating Instructions - Cube Trolley Pivot Sections When the Cube Trolley is not in use it folds away into a handy size; 1040mm (L) x 575mm (W) x 630mm (H). This is particularly convenient when space is at a premium. The Cube Trolley has two pivot sections one on each end (Fig 1). The Pivot sections can be raised from vertical to horizontal by simply grasping the handles on either side of the pivot section, and raising to slightly above horizontal, you will then hear the lock bar click into place. Fig1 Make this adjustment without the patient on the trolley. To lower the pivot section,...

Operating Instructions - Cube Trolley and Fixed Top Trolley Backrest Both ends of the trolley have a manual backrest. (Fig 1) To raise the backrest place your hand into the pocket (Fig 2) at the end of the pivot section and lift, positioning backrest support into one of the 3 set heights (Fig 3). To lower the backrest hold the backrest board from the underside and raise until the backrest support (Fig 4) can swing freely, pull the backrest support towards the rear of the trolley and lower the board. When moving the backrest into its flat/ horizontal position, ensure nothing can become...

The trolley is fitted with raise and lower cot sides (Fig 1) these protect the patient during transportation to and from the ward. The cot sides should not be used to steer/push the trolley. Depending on the design of the trolley, it will be fitted with one or other of the plungers indicated below; Standard Plunger (Fig 2) or Flag Plunger (Fig 4) Standard Plunger To operate the Standard Plunger: To lower the cot sides, pull the black plunger to disengage (Fig 3) and lower that cot side end until it stops*. Standard Plunger Engaged Fig 2 To raise the cot sides, hold the top rail in the...

Operating Instructions Raising and Lowering Trolley There is a pedal located each side of the trolley (Fig.1). To raise the trolley place your foot on the black rubber (Fig.2) and push down until you feel it stop, lift foot and allow the pedal to raise until it stops, repeat until desired height is reached, or top height is achieved (Fig 3). To lower, place foot on black rubber and push down until you feel the stop, then push further and table top will lower (Fig 4). Fig 1 Remove foot when table reaches desired height or lowest position is achieved. Please note the trolley is fitted with a...

Operating Instructions Castors Press down firmly to lock Press down firmly to release The trolley is fitted with four 150mm diameter, individually braked castors. To engage the brakes, place your foot on the front part of the brake lever (Fig 1) and push down firmly, the brake will lock in place and stop the castor from moving. To release the brake place your foot on the rear part of the brake lever (Fig 2) and press down firmly, this will release the brake. If your trolley is fitted with a Directional Locking Castor, this is denoted by the green locking lever. To engage a directional...