Trimmer HSS-88 for Orthodontics
7Pages

{{requestButtons}}

Catalog excerpts

Trimmer HSS-88 for Orthodontics - 1

For Bite Orientated Trimming of Plaster Jaw Models

Open the catalog to page 1
Trimmer HSS-88 for Orthodontics - 2

Trimmer for Orthodontics HSS-88 KFO Laser Light Guide for Model Table: Combination of daylight LED and laser, precise and without glare or reflections The production of jaw models belongs to the daily routine of a dental technician in the orthodontist field. Hence a simple and exact usage was the foremost thought in the construction of these accessories. When the instructions are followed step-by-step, it is possible for every technician to produce exact models. After a short trail period the working time is noticably shorter than with the usual method. Deposit table made of stainless steel...

Open the catalog to page 2
Trimmer HSS-88 for Orthodontics - 3

Major Features Jaw models which are precisely prepared by the dental technician give the orthodontist the basis for the necessary therapy. An orthodontist´s diagnosis can only be given according to the anatomical facts of the upper and lower jaw as well as the intercusp and the intermaxilla relationship to one another. Also, demand for more notice to be taken of the fazilan soft parts ratio has also influenced the construction of the diagnostic models. Because of these reasons the basic design was chosen according to Begg (Swiss and EOS version on request). Due to various angles of the...

Open the catalog to page 3
Trimmer HSS-88 for Orthodontics - 4

The limit stop for grinding the various base edges is positioned by a precise locking device (Fig. 5). Orthodontic Template for the Upper Jaw (Item no. 164034) The template makes it easy to grind the combined tuber levels of the upper and lower jaws. The base form of the ground upper jaw fits exactly into the template which is then set against the angle limit stop, always exactly guided towards the grinding disc. The lower jaw laid in occlusion on the upper jaw, will thus be precisely adjusted when ground. A continual inspection of the joint tuber levels during grinding is no longer...

Open the catalog to page 4
Trimmer HSS-88 for Orthodontics - 5

Grinding the Models Upper Jaw •• Lock the angle limit stop in the centre (90°). •• Lay the upper jaw model with the occlusion against the limit stop and holding it in this position (Fig. 9) push it against the trimmer disc. •• After grinding the base just a short while, the model pushes itself against the padded limit stop and it is no longer necessary to hold it. •• Remove as much as required of the base thickness. Fig. 10 Fig. 9 Mark the Raphe-Median-Line with a pencil and lay the model with the ground base onto the working surface. Move it towards the trimmer disc so that the ghost line...

Open the catalog to page 5
Trimmer HSS-88 for Orthodontics - 6

Upper Jaw / Lower Jaw •• Using the wax impression bring the lower jaw model in occlusion with the already ground upper jaw. Put the upper jaw model in the template and lay it against the 90° limit stop (Fig. 14). •• By shifting the limit stop, grind the rear side of the lower jaw model to meet the upper jaw model. •• When the joint tuber level is reached the grinding noise alters considerably. •• Lay the tuber level of both models, which are still in the occlusal position, on the grinding table and put the upper jaw base against the 90° limit stop. •• Now grind the lower jaw model down to...

Open the catalog to page 6
Trimmer HSS-88 for Orthodontics - 7

MADE IN GERMANY Wassermann is a medium-sized, owner-operated company with head office in Hamburg. We design and produce high-quality technical devices in Germany. Our main users are dental laboratories, dental clinics and various industrial areas worldwide. Why a Wassermann product? Wassermann products are manufactured from high-quality materials and the proportion of plastics used is intentionally kept as low as possible. Our devices are known for their suitability for daily use, functionality and longevity. As a result, the users place high levels of trust in the Wassermann brand. We feel...

Open the catalog to page 7

All Wassermann Dental-Machinen catalogs and technical brochures

  1. Sidomix

    2 Pages

  2. HSS-99

    2 Pages

  3. WW-33

    2 Pages

  4. Puna II

    2 Pages

  5. Gobi Classic

    2 Pages

  6. WSM-2

    2 Pages

  7. Wapo-Mat III

    2 Pages

  8. SG-10

    2 Pages

  9. Wapo-E x

    2 Pages

  10. APR- 1

    2 Pages

  11. Sidomix A

    2 Pages

  12. HSS- 99

    2 Pages

  13. WSM - 2

    2 Pages

  14. WTS - 1 R

    2 Pages

  15. SG -1/1

    2 Pages

  16. SG- 20

    2 Pages

  17. SG -10

    2 Pages

  18. WW - 33

    2 Pages