*mymedicalexpo

10603 GAMMA

Product catalog summary

Intramedullary Nail & Locking Screws System Overview

This document provides a detailed catalog of intramedullary nails and locking screws, including product specifications and dimensions.

1. Product Specifications

Compression Screws (III Type): Available in diameters of Ø10 mm and lengths ranging from 65 mm to 120 mm in 5 mm increments.
Extra Long End Cap (II Type): Product No. 10655-015, with a length of 15 mm.
End Cap (I Type): Product No. 10654-017, available in lengths from 26 mm to 80 mm (2 mm increments) and 85 mm to 100 mm (5 mm increments).
Locking Bolt (VI Type): Available in Ø5 mm diameter, with lengths ranging from 26 mm to 100 mm.
GAMMA Intramedullary Nail (Standard and PFNA Extra Long): Standard type with various diameters and lengths, PFNA Extra Long type available in diameters Ø9, Ø10, Ø11 mm, and lengths from 320 mm to 420 mm.

2. Key Product Numbers and Dimensions

Product No. 10651: Compression screws with Ø7 mm diameter, lengths from 30 mm to 120 mm.
Product No. 10652: Interlocking screws with Ø10 mm diameter, lengths from 65 mm to 120 mm.
Product No. 10603: GAMMA Intramedullary Nail with various diameters and lengths, including left and right configurations.

3. Recommendations and Best Practices

Ensure correct selection of screw type and size based on surgical requirements.
Verify compatibility of nails and screws with patient anatomy and surgical objectives.

This catalog serves as a comprehensive guide for selecting appropriate intramedullary nails and locking screws for orthopedic procedures.