PLCcontrol Manifold CHARACTERISTIC 1. This device is suitable for ambulances with large oxygen consumption, The bottled high-pressure oxygen is input to the main pipe of the control panel through a metal hose, After the high-pressure oxygen is reduced, it is transported to the oxygen terminal through a low-pressure pipe, which is used as an oxygen source for emergency use, Its working principle is to decompress high pressure oxygen to low pressure, respectively through their own pipelines to the oxygen terminal, to the oxygen terminal and ventilator port for use. 2. The control panel can be connected to two or more oxygen cylinders at the same time, and the high-pressure oxygen in the bottle can be reduced to a certain use pressure, which is a centralized gas supply equipment, The control panel is composed of stainless steel metal hose high pressure pipe, the metal hose is connected with the oxygen cylinder through the thread of G5/8, each oxygen cylinder and the control panel has a corresponding high pressure switch valve, respectively control the respective high pressure pipe, This system is suitable for any place that needs to switch gas confluence, monitor gas pressure and gas surplus, such as: hospitals, ambulances, oil, liquefied gas stations and other industrial and mining enterprises and institutions, More functions such as: positive pressure to negative pressure, air oxygen mixer and other functions, please consult customer service customization.