- Catalogs
- Weiler Engineering
- 624 ASEP-TECH® Blow/Fill/Seal packaging system
624 ASEP-TECH® Blow/Fill/Seal packaging system
624 ASEP-TECH® Blow/Fill/Seal packaging system
- Container Production: The machine can produce various container sizes ranging from 0.2 mL to 500 mL, with production rates from 1,350 to 9,000 containers per hour depending on the size.
- Air Conditioning: Requires a 6-ton cooling capacity with air exhausted at 40 CFM.
- Cooling Water: Flow rate of 8 GPM with a temperature range of 50°F to 80°F.
- Chiller: 3.3-ton capacity.
- Compressed Air: 15 SCFM at 60 to 90 PSI.
- Vacuum: 30 SCFM at 25" Hg minimum.
- Sterilizing Steam: 40 LBS/HR at 40 to 50 PSI, not used during production.
- Extruder Capacity: Handles LDPE, HDPE, and PP with capacities of 140, 120, and 100 LBS/HR respectively.
- Electrical Requirements: CE certified, requires 460V, 3 phase, 60 Hz, 100 AMPS.
- Weight: Estimated at 16,500 LBS.
Catalog excerpts
ASEP-TECH ® Blow/Fill/Seal packaging system • Entry Level Machine • Ideal for R&D Flexibility • Excellent Economic Value Safeguarding Solutions Through Typical products produced with ASEP-TECH® Model 624 Blow/Fill/Seal packaging s
Open the catalog to page 1
ASEP-TECH® Blow/Fill/Seal packaging system (363 cm) Model 624 dimensions Number of Cavities Hourly output dependent upon container design and product characteristics. Metric System 3.3 ton capacity AIR CONDITIONING HEAT LOAD The machine depicted is a typical ASEP-TECH® Model 624 Blow/Fill/Seal machine. Dimensions may vary based on optional equipment. A minimum of 4' (122cm) should be provided on sides and front of machine for operation and service. This machine is protected by one or more domestic or foreign patents. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 1395 Gateway Drive |Elgin,...
Open the catalog to page 2All Weiler Engineering catalogs and technical brochures
- Laboratory testing system
- Reporting software
- Aseptic isolator
- Analyser for the pharmaceutical industry
- Temperature testing system
- Floor-standing isolation chamber
- Continuous testing system
- Filling and sealing machine for the pharmaceutical industry
- Pharmaceutical isolator
- Automatic filling and capping machine
- Test monitoring
- Transfer isolator
- Air sampler
- Microbial air sampler
- Modular isolator
- Integrity tester
- Medical filling and sealing machine
- Capping system for industrial applications
- Automatic capping system
- Continuous test monitoring