628 ASEP-TECH® Blow/Fill/Seal packaging system

Product catalog summary

Overview: The ASEP-TECH® Model 628 Blow/Fill/Seal packaging system is an advanced technology solution designed for efficient packaging with features such as servo-controlled fill and takeout, and a split-base design for easy maintenance and changeover.

Specifications:

Air Conditioning Heat Load: 6-ton cooling capacity, 72,000 BTU/HR, 21 KW.
Cooling Water: Flow of 8 GPM at 30-50 PSI, temperature range 50°F to 80°F (10°F rise through machine).
Chiller: 3.3-ton capacity, 39,000 BTU/HR, 11.8 KW.
Compressed Air: 15 SCFM at 60-90 PSI.
Vacuum: 30 SCFM at 25" Hg minimum.
Sterilizing Steam: 40 LBS/HR at 40-50 PSI (not used during production).
Extruder Capacity: 2" diameter, 20 HP, with capacities for LDPE, HDPE, and PP.
Electrical Requirements: CE certified, various voltage and phase options, with a total connected load of 60-65 AMPS.
Weight: Estimated at 20,000 LBS (8,930 KG).

Production Capacity:

Varies by container size and number of cavities, ranging from 1,050 to 9,000 containers per hour.

Dimensions: The machine requires a minimum clearance of 4' (122 cm) on sides and front for operation and service, with dimensions of 70.9" (180 cm) height, 152.2" (385 cm) length, and 120" (305 cm) minimum clear height.

Additional Information: The machine is protected by patents, and specifications are subject to change without notice. Contact information for Weiler Engineering, Inc. is provided for further inquiries.

Catalog excerpts

628 ASEP-TECH® Blow/Fill/Seal packaging system-1

ASEP-TECH ® Blow/Fill/Seal packaging system • Advanced Technology • Servo Controlled Fill & Takeout • plit-Base Design for Easy S Maintenance & Changeover Safeguarding Solutions Through Typical products produced with ASEP-TECH® Model 628 Blow/Fill/Seal packaging s

Open the catalog to page 1

628 ASEP-TECH® Blow/Fill/Seal packaging system-2

ASEP-TECH® Blow/Fill/Seal packaging system Number of Cavities Hourly output dependent upon container design and product characteristics. Metric System AIR CONDITIONING HEAT LOAD The machine depicted is a typical ASEP-TECH® Model 628 Blow/Fill/Seal machine. Dimensions may vary based on optional equipment. A minimum of 4' (122cm) should be provided on sides and front of machine for operation and service. This machine is protected by one or more domestic or foreign patents. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 1395 Gateway Drive |Elgin, IL 60124 USA | p 847.697.4900 | f 847.697.4915...

Open the catalog to page 2

All Weiler Engineering catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list