640 ASEP-TECH® Blow/Fill/Seal packaging system

Product catalog summary

Overview: The ASEP-TECH® Model 640 Blow/Fill/Seal packaging system is a high-speed production machine designed for efficient packaging solutions. It features a servo-controlled fill tower and options for isolation/insertion.

Specifications:

Air Conditioning Heat Load: 8-ton cooling capacity, 96,000 BTU/HR, 28 KW.
Cooling Water: Flow of 8 GPM at 30-50 PSI, temperature range 50°F to 80°F (10°C to 26°C).
Chiller: 3.3-ton capacity, 39,000 BTU/HR, 11.8 KW.
Compressed Air: 15 SCFM at 60-90 PSI.
Vacuum: 30 SCFM at 25" Hg minimum.
Sterilizing Steam: 40 LBS/HR at 40-50 PSI (not used during production).
Extruder Capacity: 2.5" diameter, 40 HP, with capacities for LDPE, HDPE, and PP.
Electrical Requirements: CE certified, various voltage and phase options, with a total connected load of 105-125 AMPS.
Weight: Estimated at 24,000 LBS (10,900 KG).

Production Capacity:

Container sizes range from 0.2 mL to 500 mL, with output varying from 2,550 to 15,700 containers per hour depending on design and product characteristics.

Dimensions: The machine requires a minimum clear height of 120" (305 cm) and space of 4' (122 cm) on sides and front for operation and service.

Additional Information: The machine is protected by patents, and specifications are subject to change without notice. Contact information for Weiler Engineering, Inc. is provided for further inquiries.

Catalog excerpts

640 ASEP-TECH® Blow/Fill/Seal packaging system-1

• High Speed Production Machine • Servo Controlled Fill Tower • Isolation/Insertion Available Safeguarding Solutions Through Typical products produced with ASEP-TECH® Model 640 Blow/Fill/Seal packaging system

Open the catalog to page 1

640 ASEP-TECH® Blow/Fill/Seal packaging system-2

ASEP-TECH® Blow/Fill/Seal packaging system Model 640 dimensions Number of Cavities Hourly output dependent upon container design and product characteristics. US System Metric System 3.3 ton capacity AIR CONDITIONING HEAT LOAD WEIGHT (estimated) The machine depicted is a typical ASEP-TECH® Model 640 Blow/Fill/Seal machine. Dimensions may vary based on optional equipment. A minimum of 4' (122cm) should be provided on sides and front of machine for operation and service. This machine is protected by one or more domestic or foreign patents. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 1395...

Open the catalog to page 2

All Weiler Engineering catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list