- Catalogs
- Weiler Engineering
- 660 ASEP-TECH® Blow/Fill/Seal packaging system
660 ASEP-TECH® Blow/Fill/Seal packaging system
660 ASEP-TECH® Blow/Fill/Seal packaging system
- Air Conditioning Heat Load: 8-ton cooling capacity, 96,000 BTU/HR, 28 KW.
- Cooling Water: Flow of 8 GPM at 30-50 PSI, temperature range 50°F to 80°F (10°C to 26°C).
- Chiller: 3.3-ton capacity, 39,000 BTU/HR, 11.8 KW.
- Compressed Air: 20 SCFM at 60-90 PSI, dry and oil-free.
- Vacuum: 30 SCFM at 25" Hg minimum.
- Sterilizing Steam: 40 LBS/HR at 40-50 PSI (not used during production).
- Extruder Capacity: 3" diameter, 75 HP, with capacities for LDPE, HDPE, and PP.
- Electrical Requirements: CE certified, various voltage and phase options, total connected load varies by configuration.
- Weight: Estimated at 28,000 LBS (12,700 KG).
- 10 cavities for 1000 mL containers: 1850 containers/hour.
- 14 cavities for 500 mL containers: 2750 containers/hour.
- 16 cavities for 500 mL containers: 3300 containers/hour.
- 16 cavities for 250 mL containers: 3700 containers/hour.
- 20 cavities for 100 mL containers: 5000 containers/hour.
Catalog excerpts
ASEP-TECH ® Blow/Fill/Seal packaging system • High Speed Production Large Bottle Machine • Advanced Technology • Cap-Welder Ready Safeguarding Solutions Through Typical products produced with ASEP-TECH® Model 660 Blow/Fill/Seal packaging s
Open the catalog to page 1
ASEP-TECH® Blow/Fill/Seal packaging system Number of Cavities Hourly output dependent upon container design and product characteristics. Model 660 dimensions US System Metric System 3.3 ton capacity AIR CONDITIONING HEAT LOAD The machine depicted is a typical ASEP-TECH® Model 660 Blow/Fill/Seal machine. Dimensions may vary based on optional equipment. A minimum of 4' (122cm) should be provided on sides and front of machine for operation and service. This machine is protected by one or more domestic or foreign patents. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 1395 Gateway Drive |Elgin,...
Open the catalog to page 2All Weiler Engineering catalogs and technical brochures
- Laboratory testing system
- Reporting software
- Aseptic isolator
- Analyser for the pharmaceutical industry
- Temperature testing system
- Floor-standing isolation chamber
- Continuous testing system
- Filling and sealing machine for the pharmaceutical industry
- Pharmaceutical isolator
- Automatic filling and capping machine
- Test monitoring
- Transfer isolator
- Air sampler
- Microbial air sampler
- Modular isolator
- Integrity tester
- Medical filling and sealing machine
- Capping system for industrial applications
- Automatic capping system
- Continuous test monitoring