Catalogs >
Welch Allyn >
SureTemp® Plus

SureTemp® Plus
34Pages

Catalog excerpts

Welch Allyn SureTemp © 2018 Welch Allyn, Inc. To support the intended use of the product described in this publication, the purchaser of the product is permitted to copy this publication, for internal distribution only, from the media provided by Welch Allyn. Welch Allyn assumes no responsibility for any injury, or for any illegal or improper use of the product, that may result from failure to use this product in accordance with the instructions, cautions, warnings, or indications for use published in this manual. Welch Allyn is a registered trademark of Welch Allyn, Inc. Patent information...

Open the catalog to page 2

TABLE OF CONTENTS Conforms With . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Symbols and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SureTemp Plus Model Comparison Chart . . . . . . . . . . . . . . . . . . . . 6 Indications/Contraindications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Latex Statement . . . . . ....

Open the catalog to page 3

Welch Allyn SureTemp Plus

Open the catalog to page 4

Conforms With IEC/UL/CSA/EN 60601-1 Australian Communications and Media Authority (ACMA) Radio Compliance Mark (RCM) Symbols and Descriptions Consult directions for use (DFU). A copy of the DFU is available on this website. A printed copy of the DFU can be ordered from Welch Allyn for delivery within 7 calendar days. Type BF Applied Part Internally Powered Alkaline Battery - AA 1.5V Not protected against the ingress of water. Does not contain natural rubber latex. Do not re-use, Single use device Separate collection of Electrical and Electronic Equipment. Do not dispose as unsorted...

Open the catalog to page 5

Welch Allyn SureTemp Plus Meets essential requirements of European Medical Device Directive 93/42/EEC Intertek Testing Laboratories Approved (ETL) Serial Number

Open the catalog to page 6

Safety and Warnings WARNING No modification of this equipment allowed. WARNING Patient injury risk. Prior to taking a temperature, instruct the patient not to bite down on the probe as patient injury and damage to the probe may result. WARNING Patient injury risk. Use only Welch Allyn single-use disposable probe covers. A new probe cover needs to be used with each new temperature taken. Never take a temperature measurement without a single-use probe cover securely attached. Failure to use a probe cover can cause patient discomfort from a heated probe, patient cross-contamination, and...

Open the catalog to page 7

Welch Allyn SureTemp Plus Caution Liquids can damage electronics inside the thermometer. Prevent liquids from spilling on the thermometer. If liquids are spilled on the thermometer, dry off the thermometer with a clean cloth. Check for proper operation and accuracy. If liquids possibly entered the thermometer, remove the thermometer from use until it has been properly dried, inspected, and tested by qualified service personnel. Caution Welch Allyn recommends that batteries are removed for long term storage since alkaline batteries can deteriorate and leak over extended periods of time, and...

Open the catalog to page 8

Introduction Please follow the operating and maintenance instructions provided in this manual to ensure years of accurate and reliable service. Please read these instructions thoroughly before using the instrument, and then store these instructions in a safe place for future reference. The Welch Allyn SureTemp Plus is a portable thermistor thermometer used for accurately measuring body temperatures at oral, axillary, or rectal sites. The device measures temperature by default in predictive (Normal) mode, during which it uses a predictive algorithm to calculate patient temperature. If you...

Open the catalog to page 9

Welch Allyn SureTemp Plus SureTemp Plus Model Comparison Chart This manual describes features found in SureTemp Plus model 690 and 692 thermometers. Certain features are not available to users of the model 690 thermometer. SureTemp Plus Model 690 SureTemp Plus Model 692 Probe Cover Storage Last Temperature Recall Monitor Mode Detachable Probe Oral / Axillary / Rectal Modes on Each Thermometer Color-Coded Removable Probe Well Wall-Holder Standard Pulse Timer Security (Electronic) Configurable On-Screen Labeling for Identification of Instrument Sold Internationally Instrument Warranty...

Open the catalog to page 10

Latex Statement The components of the SureTemp Plus device that could contact the user or patient were not made with natural rubber latex. This includes all items that could be contacted during normal operation, and all other functions, such as user maintenance and cleaning, as are defined in the Directions for use. No internal components are known to be made with natural rubber latex. Parts and Features You can find the serial number of your device on a label affixed to the rear housing inside the unit’s probe cover storage compartment. Please note the parts of your Welch Allyn SureTemp...

Open the catalog to page 11

Welch Allyn SureTemp Plus Button Functions Buttons Press and release the C/F (Celsius/Fahrenheit) button to toggle between temperature scales any time a temperature is displayed on the LCD. Pulse Timer/Monitor Press and release the Pulse Timer/Monitor Mode button to activate the timer. Audible beeps sound at 0, 15, 30, 45, and 60 seconds. The timer turns off automatically after 60 seconds. You can stop the timer at any time by pressing the Pulse Timer/ Monitor Mode button or by removing the probe from the probe well. For Monitor Mode, press and release the Pulse Timer button after you have...

Open the catalog to page 12

uninsulated exterior wall, in an area directly hit by sunlight, above heat radiators or powered equipment (including computers and lights), or below air conditioning outlets is not recommended. Proper mounting of the unit will prevent tangling of the probe cord with other equipment at the patient’s bedside. 1. Mount the instrument so that all other objects are no closer than 4 inches (10.25 cm) from the sides and bottom of the unit. 2. Mount the wall mount a maximum of 48 inches (122 cm) from the floor. 3. Install the wall mount to allow at least 12 inches 30.5 cm) clearance on top of the...

Open the catalog to page 13